WUZ

Keep us updated M8! Russell

I have a full set spare here m8 - PM me an offer if you are interested! Russell

Pink Organic Russell

Exedy clutch will cope quite well with that power Kev. Don't forget to get the flywheel skimmed too! Russell ps - Dump Valve PM answered.

EARLY START! - at least that means you got to bed! (lucky sod!) Had mild food poisoning on Saturday that meant I couldn't do a thing on the cars! Still got loads of work to do Russell

(Austin Powers mode ON) YEAH BABY! YEAH! (Austin Powers mode OFF) Russell

Yes you can drill them out. Yes you can change the studs if they are damaged. Russell

Didn't think you were mechanically minded Pete - fancy giving it a go and getting your hands dirty then? - GOOD MAN!

Wait until you see the amount on the turbo outlet and inlet pipe good corrosion protection though Russell

I'll leave him to work on the Disco and once he's good enough.................he will be unleashed on the X3 Russell

On the "service wagon"? SURE? On the wife's X3.......................you - YES, Marc, HMM not until he's practised on his sporty italian red motor! Russell

Still luv ya to bits though!Russell ps - gimmeahugwillya!

Iain - I try to do the above and he just phones the Mobile, then the house phone and if I still don't get back to him...............he turns up outside the house like some kind of bunny-boiler!!!!!!!!! You have been warned! Russell

Remember that Rostant Engineering will be charged a fee for using BHP premises and equipment (ie, the oven!) Russell

Some people are closer and cheaper M8 - there are plenty of options to choose from! Russell

I am ordering some more like but will need a confirmed order b4 I go ahead and get you a set. Sorry, but I'll be offshore on the 26th M8 Russell

John - 2nd-hand set of STi Brembo's M8, ideal for the type of driving/track work you are doing! Russell

No you don't need the tool Peter, a normal pair of pliers will do just fine. Russell

Alan does make a couple of good points there! So long as it does not get personal ( and it shouldn't)................be the bigger man and let it slide! Russell

Have to say that if Dougster is having posts removed by a Moderator - WHO IS SELECTED BY THE MAJORITY TO WORK FOR THE CLUB AND NOT THEMSELVES - surely he has a right to know, by means of a reply to said post and not a removal of said post, why it was done. He is a paying member and as such has a voice which has a right to be heard. If his posts are viscious or threatening, then they deserve to be removed. Doug - read your PM and replied with the information you required m8. Keep it to yourself though! Don't want too many people finding out what we're discussing. Russell

You should try being on our "local" forum......................I (and several others) have encountered exactly the same issues! I'll say no more (those who do it know who they are) Russell

Agreed - if the fuel pressure is dropping to 0 when ignition is off then be careful as you'll need to make sure you don't start the car until the injectors seals have been checked as you could be slowly filling the combustion chamber with petrol (if there is fuel pressure) and a full cylinder at or past it lowest stroke can have a HUGE hydraulic piston effect if you turn the engine over. It is possible to destroy the starter motor, bend an OE rod or damage the crankshaft if your not careful (this is of course the worst case scenario but it's worth bearing in mind. Russell

Knew that already Russell

Right - seeing as Andy's staying out at the ranch for this, we thought we'd organise a meal out in Inverurie on the Monday night (after day 1, before day 2). I was looking to get an idea of numbers so I can order a table (or 8!) I was thinking of an Indian but the general concensus will dictate the food choice! 1 - AndyF 2 - WUZ 3 - Boyakasha Russell ps- if no one is sure, we'll just get LOADS OF PIZZA and chill out at the ranch! pps - BACON BUTTIES will be the order of the day on Monday and Tuesday, for those who make it B4 Andy gets up

Russs - PM Marc and get him to ask the guys to get their opinion.. Russell