-
Posts
3,588 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by little vodka goblin
-
-
Mine are now but it only me down here lol, having Ruby and the R down the street from me would be pure pr0n lol
Perhaps we should all buy houses next to one another and rename it Scooby Street!
-
My scoob is silent was I had the cash to do something about it
I guess I could just remove the rear silencer and center section lol
What and leave them off? Would certainly be noisy then
Rubes is by no means loud but we've just had the centre pipe changed which has done away with the resonator and that's certainly made a difference, only cost about £90. Next stop is doing away with the Prodrive backbox and getting a Tornado one from Scoobyparts
-
Lol if we went down my little road i think Chrissie would lynch me Oh well
I think my neighbours are used to the noise now Rick
-
Oh you guys are terrible, fancy wanting to inflict all that noise on poor unsuspecting people asleep in their beds.......................
BRING IT ON !!!!!!!!!!!!!!!!!!
-
I'll meet you guys at Maccy D's
That's great Mike, thanks.
Rach
-
Meeting at the Hungry Horse:
Little Green Goblin
Woodcote
Scooby Ian
Rick N
Ace
Looks like we have a convoy guys
-
Will see you at the hungry horse though i may be non compus mentus due do it being before 10am
You'll soon be on the ball once the convoy starts Rick
-
what would be best for me, ill be coming from cambridge way?
You have two options really, if you'd like to convoy with us we'll be using the A421 into Bedford from the Black Cat roundabout on the A1, there's a lay by about half a mile (ish) along the A421, we could meet you there at around 7.15 a.m or your most direct route would be along the A14.
Cheers
Rach
-
Will meet you at the hungry horse.
Excellent, we'll see you there Ian
-
Ok guys convoy route and times as promised:
Meet at the Hungry Horse car park, 397 Goldington Road, Bedford, MK41 0DS.
Leaving here at 7.30 a.m
Following A428 into Bedford onto the A6 North (Rushden)
West onto the A45 at Higham Ferrers to the A509 roundabout where we'll be stopping at Maccy D's, Enstone Court, Wellingborough, NN8 2DR - approximate arrival time 8.15 a.m
Leaving Maccy D's at 8.45 a.m to arrive at Zen for 9 a.m
A509 North (Park Farm Way), over 1st roundabout with Sainsburys on the right, up the hill, straight over the 2nd roundabout (Bannatyne's gym will be on your left), second exit at the next roundabout (Sinclair Drive), second left into Baird Court and Zen Performance is the 2nd unit on the left.
Zen's full adress if you are not convoying with us is:
Units C6 & C7 Baird Court,
Park Farm,
Wellingborough,
NN8 6QJ.
Please let me know if you intend to convoy with us so that I know who we are meeting and where.
Any problems on the day my mobile number is 07766 002293.
Cheers,
Rach
-
Sweet, ill see you at 9am then =)
Certainly will
-
-
1. Little Green Goblin - 03 WRX with PPP (looked after by Zen)
2. Woodcote - STi Type R version 5 (engine rebuilt by Zen)
3. Tied old Dad - WRX (looked after by Zen)
4. Ace - MY03 STi (mapped by Subaru)
5. Van Diesel - MY00 Turbo (mapped by Zen)
6. Tim (Scoobyparts)
7. DaOne (mapped by paul)
8. Smoove Mike
9. stevie1982 (mapped by bob rawle)
10. Leesta
11. stevehf2 '96 STi
12. Phildodd06 STI Type R version 5
13. Paul 1 x 330bhp
14. Paul 1 x 500bhp
15. Wayne 02 STi PPP
Possibles
1. Decorator man at Scoobyparts on Saturday 6th Feb
2. STI Mav - Hawkeye STI with PPP
3. Mr TC - 09 Focus RS
4. Paul 1 x 600bhp
5. Paul 1 x 600bhp
Spectators
1. Frenchy
2. Bockett (possible)
3. Rick N
4. Scooby Ian
5. Big 'D' (possible)
6. stum450n
7. STIWALDING
-
looking good
not long now
Yeah I'm starting to get pretty excited about it now
-
Ok guys,
Rather than reply to each question individually I'm now going to attempt to answer them all in one go (so if I miss anything please shout):
Mud Flaps
Not an issue - if need be the front ones can be moved out of the way of the rollers.
Times
Paul would like to start at 9.30 a.m so if we can start getting there from 9 a.m onwards this will be perfect. Unless you want a specific time it will be on a first come, first served basis. He is also going to draw up an imdemnity form to be signed as well.
Data Printouts
Power and torque at wheels and flywheel readouts and then a boost and air/fuel mix readout.
Advice On The Day
Info will be available from the printouts and then Paul can take a separate discussion about particulars and advise.
Payments
No deposit required, pay on the day. Cash is preferable but 'debit' card is ok. 'Credit' cards will have a 2% surcharge added.
Think that just about covers it all.
Cheers,
Rach
-
what happened to it ....
.... no one told me you had check the oil on a regular basis
Now I won't tell you why the engine let go on the 'R' last year BUT..........................................................
Only joking! ( I'm dead when he sees this)
-
I think we've all been there with dodgy hair when we where young...
Stu,
I admit defeat - you've beaten me fair and square!
-
I've just had to dig into the the deep and murky depths of my understairs cupboard to find these - excuse the quality of the pics but they are 22 years old:
And for you mean so and so's who want a good laugh at my 1980's perm....................................................TAA DAA!!!!!!!!!!!
Well I was young, that's my excuse
-
Wow Goblin!
I also had a '82 Ford Escort - it was supposed to be red, but had got dull with age and some nice person put glue all over the roof!
Got the motor in 1991 - 4 speed box - 4 door - cost me 900 notes - did 105 mph lol!
Sold it in 1993 for 500 notes
Then went onto a 309 Sri
Ah Matty, my little girl was gorgeous, I'll see if I can find some pics of her later and post them up (as long as there's some without me in them with my dodgy 1980's perm lol).
-
I see where you get the R Thing from
Yep, it's definately the "R" factor in this household!
-
Mine was a 1982 X reg Ford Escort 1.3L in Sunburst Red (how sad I still remember the name)
Cost me £1500
I bought it because it was a 3 door and at 18 looks were everything (what am i on about I'm now 39 and they still are).
I sold it to the scrap man after I blew up 2 engines in 3 years - and yes guys I DID put oil in it!
Oh yes and as with all my cars she did have a name - this one was called "Rebel"
-
Hi, i'm new to the forums, but is it ok if i get my V5 Type-R on the rollers?
I'm from Coventry so not far for me to travel...
Absolutely mate, you're more than welcome the more the merrier.
Would you like to go on at any particular time to allow for your travelling?
Cheers,
Rach
-
About 11-12pm as I'm coming from Essex.
Will the guys from Zen be able to tweek or solve any issues while I'm there? I'm not sure if i'm a little under on boost or not as i'm not sure if my gauge is reading correct!
I had it on dyno at Torque dev in Essex and they said it was 0.9 but my gauge shows 0.75!
Hiya,
11-12 should be fine, I'll be sorting out times on the rollers over the weekend/early part of next week so I'll get you on around midday if you want.
Paul is now a "one man band" so to speak so i can't say for definate whether he'll be able to help you out on the day but I need to speak to him over the next couple of days so I'll let you know.
Hope this helps,
Rach
-
Rach, Pm for you.
And one for you mate
Anyone Up For A Rolling Road Day?
in South East England
Posted · Edited by little green goblin
1. Little Green Goblin - 03 WRX with PPP (looked after by Zen)
2. Woodcote - STi Type R version 5 (engine rebuilt by Zen)
3. Tied old Dad - WRX (looked after by Zen)
4. Ace - MY03 STi (mapped by Subaru)
5. Van Diesel - MY00 Turbo (mapped by Zen)
6. Tim (Scoobyparts)
7. DaOne (mapped by paul)
8. Smoove Mike
9. stevie1982 (mapped by bob rawle)
10. Leesta
11. stevehf2 '96 STi
12. Phildodd06 STI Type R version 5
13. Paul 1 x 330bhp
14. Paul 1 x 500bhp
15. Wayne 02 STi PPP
16. WhisperUk
17. trevorjwood
Possibles
1. Decorator man at Scoobyparts on Saturday 6th Feb
2. STI Mav - Hawkeye STI with PPP
3. Mr TC - 09 Focus RS
4. Paul 1 x 600bhp
5. Paul 1 x 600bhp
Spectators
1. Frenchy
2. Bockett (possible)
3. Rick N
4. Scooby Ian
5. stum450n
6. STIWALDING