jimser

looking good john

nice result mark

especially on a humble 2.0l

We have been getting treated like crap for a while, our last pay deal was shocking 2.6% last year and 2.5% this year. I was up at college there doing my Mates/Masters there before Christmas and was called back early because of staffing difficulties so didnt get to finnish my course. I asked HR in December if I would be able to go back to college for 5 weeks starting 21st April and it took them over 6 weeks to ask the Marine super if I could go, and he said no!

When I got to the ship, I found out I was brought back so another guy gould go off and start the same course as they pulled me off, I thought I was joining as 1/o/s (next rank up from where I was) as there was nobody else in the agency with the same experience as me as I have had 4 yrs in and sailed as 1/o/s a few times before but it turned out that they had tranfered a 2/o from the Jura who has only been in the agency since April last year, only just got his BFSO warrant and had never sailed as 1/o/s before.

Anyways last trip I had to go away boarding in my own time to show this guy how to measure a net (bearing in mind that he is now sailing in a higher rank than me and getting paid more!). On top of that we got a new Captain join the vessel after the previous one resigned to go get more time off and more money, anyways the new Captain is an a***hole and was picking holes in everything you did so I resigned. I was just tired of being treated like crap

Graeme

you should have stuck in at school mate and you could have been a taper

is that 5 scoobs now geo?

looks like another cracker mate

jim

Here is what you need:

1) Camcorder

2) Decent weather

3) Camera clamp

4) Decent video-editing software

5) A guy that's clever with the software (not me!)

6) Huge slice of self indulgence.

I think you'll like it... enjoy Click

.

Please note: Video editing software was used to speed up clips to create the illusion of high-speed. No speed laws were compromised in the making of this short film.

good stuff john!

thanks for offers but all is sorted now,

just need Gary D to do the heart transplant on sat and good to go for map on monday

glad you got it sorted mate

and as peter said i would have HIRED you mine if you were stuck

ran the car today

been fine running normally, all the power is there

god knows why it decided to throw the toys out of the pram

the smell of diesel maybe?????

sorry mate ,couldnt resist

Bloody hell Jim, your missus must love you as much as mine does me. Engine parts strewn accross the floor, respect is due

fortunately for me colin i dont have a missus......czech bride group buy anyone?

right jim, how much did you actually win on the lottery?

if you don't hurry up and get the parts fitted you may need to rent a lock up or get a bigger flat

lol,if only mate

just need the car first and then a couple of spare days to do the work

aye, with all the chicken salads Jim's been eating he's slimmer than DCI Lee

yea just a bit imy

not sure if the dci's butt will fit in the sparcos

i sense a rival for the chinese chocolate 600. Parts are looking good mate

dont think peter will have anything to worry about from me.........................................yet

I thought the standard car was sorted Jim but it's getting better by the day .

Good taste !

cheers frank

well decided standard clutch wont be up to the task ahead so got this

carbon twin plate

and well it would be rude not to have a plan b just incase the engine explodes

closed deck block

jim

good stuff m8, another fine trackcar in the making, hopefully we will have enough decent powered scoobies around at knockers to give those bruce taxis evos a good humping (i hate getting past by them fookers)

yea im sure they'll get a run for their money this year

i just need to find a driver for mine

If it's as big as i think it is, then yes, it will be tight. Maybe too tight.

i knew andy had fitted 1 of these in his inner wing.

still i expect there will be a lot of cursing etc before it fits

looking good paul

im sure there will be plenty of fun/scary moments ahead in it

Is the perrin headers equal lenght ie you need to change the sump etc .Do you modify the sump or see if there is a written off 03 Jdm sti or spec c or newer with equal length headers for the sump and other bits you need to fit the perrin headers

yea mate the perrin headers are equal length.i suppose you could hope to find damaged jdm twin scroll car for the parts but i just bit the bullet and ordered 2.5 sump etc from the dealers.

well the cars still waiting to be sva'd so all i can do is keep buying parts lol

got these seats,but alas are for the very slim

sorry no pax laps for wide butts

midget battery

and a diy cai.the cone came off the chocolate 550 and may be a bit of a tight fit in the inner wing

more to follow......

jim

Skinny humpers also have massive appendage's

When yours arrive Jimbo?

still waiting on sva and im still gathering the goods for the party

Jac,

your not sugessting that jim planned to hit that lampost so he could get to "stage rex rocket 2" and smoke everyone

ouch!

every cloud has a silver lining mate

let the smoking begin

Yes! the heart of his rocket is now installed in my chassis! Let the humping begin!!!! Hahahah!

cant say much to that john ....well apart from skinny humpers hump quicker

Jim the link is not working... I remember your Rex rocket, you humped us all in the beginning with less power...

There is some thing brewing... History has a tendency to repeat its self ...

link will be working shortly i hope

only time will tell mate,i certainly cant compete with

the hollywood builds

heres a clip of a couple of cars with meercat exhausts

i know the sound quality isn't great but a good excuse to watch peter getting

heumped by the rex rocket lol

http://s60.photobucket.com/albums/h8/mctwi...07_04010013.flv

just looking at my options for springs. was going for prodrive ones then john's teins have come up but the website for tein says they only fit p.c.d 100. Geo has come up with whiteline ones i am confused lol

Description Tein S.Tech lowering spring kit.

-35mm Front and -25mm Rear

Spring Rates of 241lb F and 162lb R

See http://www.tein.co.jp/steche.html for more details.

These fit both 100mm & 114.3mm PCD variants

cheers a seen them on ebay shops just never had to get one so didnt no best kind. looks like a pain to change

this might help

http://forums.sidc.co.uk/index.php?showtopic=105985

probably a bit easier too if you have a small hand