oobster

Thats the one claire - works in the same ind. estate as me, see it most days coming in or going out @ 5pm.

Did you get a loan of the leathers and the skid-lid chris, or do you own said garments? []

Dunno mate, but there is a VERY nice one for sale on here, by a regular SIDC member - 2559B. http://forums.sidc.co.uk/forums/630431/ShowPost.aspx Think he's looking for £9,200 for it.

Got it [Y] Let me know how you get on!

Yup [] Would have been me - had to go get some Optimax on the way home

Vicki - i'll PM you the number of the guy i've used a few times - always been spot-on with arranging to meet-up.

Your only here once bud. Exclusive-ness comes at a price, and they are braw wheels!

They are VERY nice. The anthracite colour, not the gold for some reason. You going to see if you can get the anthracite in 5x100 fitment?

Welcome to the forum Derek [au]

Bought my car off them about a year ago, dealt with Keiran, no problems. Deal went fine, car has gone fine since, was quite happy with the deal i got. Also dealt with Lorna in service, always helpful and they have came up to Bellshill a couple of times to pick the car up when it's needed a service or I was having mods done. Ian in parts department was also spot-on - ordered some bits and he posted them up to me to save a drive, all arrived when they said they would. They also do the 10% discount for SIDC memebrs, on parts & service. What u thinking of buying?

Na - the sealant is melting. When you stick both halfs back together you have to re-heat the sealant so it will stick the lense to the back bit again. I'll nip thru and give you a hand if you want - i was the same as you - a bit feart i'd muck it up. But i watched Jamie closely when he done mine and i'd be confident enough to do it myself now. Buy the bulbs and geez a shout.

Hullo Martin. My car has been de-tangoed, and so has Gus The Bus. It does make quite a difference to the look of the front (IMHO). You need to take the headlights out, remove the 8 or 9 small screws that hold the lense onto the back bit (remembering the one underneath a wee bit of foam!) then heat the sealant round the lense - Jamie done mine and used hot water (kettle) and his Mrs. hairdryer - start at one corner and gently prize open the lense. Once the lense is off be careful not to touch the inside of it (fingerprints) then the orange bit should just clip out. Re-attach the lense (Jamie didnt use any new sealant on mine and they have never misted-up since) then re-do all the 8 or 9 screws, plug back in and fit some silvatec bulbs (available from Revolution) and job's a good-un! If your ordering the bulbs, best to order two sets and swap the rears out while u are there. Jamie spray-painted my orange bulbs silver though and they still looked & worked fine so you might want to do that (the bulbs from Revolution are about £15 per pair) Bound to be pics on the forum somewhere of Gus's motor - check the for sale sections and there might be pics from when he was selling his wheels. Think Irish Al has done his too. There's a pic of Al's car on Ricey's 19" Aerospeed alloys thread. HTH Andy

http://bbs.scoobynet.co.uk/showthread.php?t=499194 Didnt go to this last year, but might this year if there is a Scottish mob trundling down?

Ed - did the graphics make much of a difference to your insurance?

I'll PM you in a min - get your opinion before i ask the masses, incase i get the P ripped clean oot me! Andra

Gus - just my opinion bud, but yours looks the dawg's danglies without the graphics. Now, i have to admit, i am also looking at graphics myself (not the SWRT ones) so i understand the reason for looking into it! P.S. if you decide to go ahead, karps might be able to help too! I'll wait a few days before i postup my ideas.

Thought i recognised it too - went to some 'New Horizons' microsoft courses in there a few years back Looking nice Fee []

Those new OZ Ultraleggera's look braw.

Just remember not to drop one of the bulbs on the ground Martin! (hint hint) []

P.S. Get them wheels washed - they are manky!!! []

Same here martin - didnt drill mine. Wonder if i'll need to remove when the car goes in for it's MOT?

Braw Martin [] Did you drill it as per the instructions?

Nice one Sharon..... i trust you looked after the customers car with care! Keep saving and one day you'll have shiney blobeye or bugeye sitting out the front []

http://www.oob315.freeserve.co.uk/ICEsetup.pdf