b4z

hi guys. After some sdvice. I recently bought cusco coilovers for my classic but the ajuster knobs on the lower section are eather dammaged or seized . Can this be fixed if so who works on coilovers ? thanx B4Z

Warranty will be fine if its serviced on time using subaru parts.

If a was u a would be trying 2 jet wash them first 2 get the coolant out the wrap.If u do this make sure the car is not roasting hot u dont want 2 crack anything

great lookin bunch o cars there guys

a used ava near the air port was about 70 quid and car was on for about an hour ajusting things

if u dont mind me asking mate where did u get the scoop am after one my self

can u not use a boost presure valve or a bleed valve. only thing with the bleed valve though the boost will change with the temp

a ahve a mate with an rst and his car tails off about 6psi as well it could be ok

thats a big drop off ma car has only ever dropped 2 psi between peek and held boost but like the sound of the chip

it v power not enough?

was wondering if anyone had used polar performance before? they are doing mapped chips for the pre 96 scooby. was wondering if anyone had hear about them or used them before??

hate 2 hear if this. Car looks very clean hope they find her

samco them self are always a nightmare to deal with things always take ages to come ebay is the place for me

v power is 99 octane

they are for ma car they will fit wont they?

its a 96 classic uk turbo

after some advice on coilovers. shocks are on there way out and the springs are far 2 low on my car so looking 2 change the lot 2 coilovers.on quite a tight budget and a dont mind second had parts can anyone point me in the right direction

would be saying something 2 her first

thanks for help

had dealing with this place in the past . bloody nightmare!! wanted 2 buy a car but clutch was knacked was told ity was going 2 be fixed so i could test drive the car and booked a date . arrived car not moved no phone call 2 more dates set still car not moved. Waste of my time and fuel going back and forwards. Took the car i had at the time for a s/s exhaust. the welding was shocking and had 2 go back 4 times 2 get the thing re welded by this time it was a build of of snotters around every seam. will never use sales or work shop again!

hi folks. looking 2 change the door speakers in the front of my early classic impreza can anyone tell me what size they are or what will fit? thanx b4z

sounds like leaky rims mate used 2 see this all the time u would need 2 realy take tyres off rub the lip inside the wheel down with some emmery paper and use bead sealer when puttin the tyres back on. also check the valve centers are in tight

sorry sight to see car looked great allot of work up in smoke there hope the insurance gose smoothly

hi am after some advice on tyres think the size is 205 50 16 on my classic sti wheels looking for something half decent thats not 2 high priced

looks good a seen this at falkirk next 2 a load of old rovers lol