Psi to bar

[dipsy]

Can sombody tell me how you convert psi to bar.I had haynes manuals of other cars which had the figure to change Psi to bar but don't have these any more any idea please.

[the squiggle]

Roughly Ibar equals 14psi

Grant

[jcscoob]

I think it's 14.7 psi to 1 bar !

[dipsy]

I know that 14.5 is i bar .You divide the 14.5 of the psi figure .My father just told me .My car is in awd on thursday for Andy f to check the ecutek2 exchange ecu to adjust for boost creep and spiking thats if the lisence is there or its tek3 custom map. he will give me acurte boost pressure with the delta dash.Because the autometer i have reads 20psi at full boost yes on tdo4.Which is too high for this turbo so i will know how far out my boost gauge is.

[coulty]

No guys 14.7 psi = 1 atmosphere

14.5 psi = 1 Bar

Stuart

[Gee Wr1]

Try this had it saved in my favorites.

Should help u out.

Converter

Gee

[teknopete]

Yeah Stuart, your on the nose there fella

1 bar = 14.5037738 pound/square inch [absolute]

Pete

[dipsy]

Thanks for the replys

[Hepy]

The little application on this page is useful for converting all kinds of things. I've been using it for ages.

convert

[jasonb]

cool that means i am running 1.31bar, thats a hand converting tool

[fai17]

sorry to correct yous all but...

1 Bar-1 Very Drunk Man

[st3ph3n]

My Blitz R-Vit reads out the Intake Manifold pressure in hKpa, which is hecto kilo pascals (100,000 Pascals).

It usually peaks at 1.25 ish I think, which would be 125 kPa. There's 100 kilo pascals in a bar, so that means I'm hitting 1.25 Bar (easy conversion from hkpa to bar ).

Is that about right for an 05 WRX with no intake modifications?

[Stiks]

Sounds about right - I have an R Vit and get 1.27 HKPA peak on a very lightly modified My02 STI ( Panel filter and cat back exhaust).

Good wee gizmo the RVIt.... the intake temperature is frightening in traffic. Why Subaru ever put TMIC's in I'll never know

Keith

[2559B]

psi to bar ??? don't know where psi is ( can't find it on multimap? ).........my advice would be to just get a taxi and stay at the bar !!!

[st3ph3n]

Ah Stiks. I'm glad it's not just me who needs to call for new underwear when reading the temps in traffic. I have my R-Vit set on elipse meter reading the boost, but have the second value on that display showing one of the temps, water I think. It's best to ignore it.

[Stiks]

<< psi to bar ??? don't know where psi is ( can't find it on multimap? ).........my advice would be to just get a taxi and stay at the bar !!! >>

Or just get psi(t) at the bar

[Gee Wr1]

<< Ah Stiks. I'm glad it's not just me who needs to call for new underwear when reading the temps in traffic. I have my R-Vit set on elipse meter reading the boost, but have the second value on that display showing one of the temps, water I think. It's best to ignore it. >>

Watching intake rise in town is shocking

Got my Rvit main displays set to show Boost, Intake & water temp.

[dipsy]

Weres the best place cost wise to buy one of these blitz r-vit.I was speaking to st3ph3n at the last sidc day at knockhill and he gave me a demo on the way it works

[wrxmania]

eBay is the best place. Stiks has one, amongst others!

Brian

[Gee Wr1]

Dipsy i got mine of Ebay, paid about £180 for it if i can mind right.

It's defo the first place to look all the ones i've seen on there are a lot cheaper than uk suppliers, only prob though is the instructions are in Japanese but seem to have figured most of it out by playing about with it Probably lots more to it if i could read instructions

[st3ph3n]

Only guy that seems to have them is this one - here. I always look at his stuff. Always well cheap electronics and good wheels.

If anyone's ordering something then mine's the Work Emotion wheels or the Volk wheels. I'll pay you back. Hounest