tannan Posted March 2, 2009 Share Posted March 2, 2009 (edited) its awaiting for its new inter cooler to be fitted not looking forward to cutting the bumper Edited March 5, 2009 by tannan Link to comment
scooby-22 Posted March 2, 2009 Share Posted March 2, 2009 I used a dremel multi tool with the cutting disc then give a quick sand over the rough edges, if thats any help Link to comment
tannan Posted March 2, 2009 Author Share Posted March 2, 2009 Thank You for that i was going to get a dremel at some point looks like now is the time. did you use it to cut the iner wing out Link to comment
scooby-22 Posted March 2, 2009 Share Posted March 2, 2009 That was a right pain, i used open ended hacksaw, the dremel and some snips. I got some trim off ebay that covered the edges which looks smart and cover the sharp edges. Link to comment
gordon_cross Posted March 2, 2009 Share Posted March 2, 2009 Seany, what on earth are you doing Link to comment
scooby-22 Posted March 2, 2009 Share Posted March 2, 2009 (edited) Dont know if this is any use to you but this is what i put around the hole in the inner wing. The one i bought was in uk this is just an example Trim stuff Edited March 2, 2009 by marc_eddon Link to comment
tannan Posted March 2, 2009 Author Share Posted March 2, 2009 Dont know if this is any use to you but this is what i put around the hole in the inner wing. The one i bought was in uk this is just an example Trim stuff Thanks i will get some of that as i want to keep it as clean looking as i can. Its the inerwing cut that is going to be the pain Link to comment
gordon_cross Posted March 3, 2009 Share Posted March 3, 2009 Blimey that was quick Sean. Best get me finger out tomorrow and get a few bits together for you. Link to comment
tannan Posted March 3, 2009 Author Share Posted March 3, 2009 Its an autobahn88 mate looks very good the pics don't do it justice Link to comment
tannan Posted March 3, 2009 Author Share Posted March 3, 2009 (edited) Blimey that was quick Sean. Best get me finger out tomorrow and get a few bits together for you. hello m8 yes pull ya finger out will you lol Edited March 3, 2009 by tannan Link to comment
wrx_aaron Posted March 3, 2009 Share Posted March 3, 2009 are you planning on reconnecting your aircon? Link to comment
tannan Posted March 3, 2009 Author Share Posted March 3, 2009 no m8 you don't have to only when you run a reversed inlet you loss the air con Link to comment
wrx_aaron Posted March 3, 2009 Share Posted March 3, 2009 no worries, i was just going to say that if you were then you'd need to replace parts within the system because they have been exposed to air for a period of time. Out of interest how did you evacuate the system? Link to comment
tannan Posted March 3, 2009 Author Share Posted March 3, 2009 no worries, i was just going to say that if you were then you'd need to replace parts within the system because they have been exposed to air for a period of time. Out of interest how did you evacuate the system? I have not as i did not tuch the air con mate you dont have two tuch it at all Link to comment
tannan Posted March 3, 2009 Author Share Posted March 3, 2009 are you planning on reconnecting your aircon? sorry i read your post wrong. I have not taken the air con off Link to comment
ryan_gwa Posted March 3, 2009 Share Posted March 3, 2009 Where did you get the FMIC from? As im interested. Link to comment
tannan Posted March 3, 2009 Author Share Posted March 3, 2009 (edited) flat 4 online matey paid for it yesterday got it today Edited March 3, 2009 by tannan Link to comment
scooby-22 Posted March 5, 2009 Share Posted March 5, 2009 Your going for the stealth look like it Link to comment
tannan Posted March 5, 2009 Author Share Posted March 5, 2009 Yes i want it to mach the rest of the car :)and then it will not stand out and people will not no its there ) Link to comment
gc8-r Posted March 5, 2009 Share Posted March 5, 2009 how much cutting out did you have to do to fit it Link to comment
tannan Posted March 5, 2009 Author Share Posted March 5, 2009 not much at the moment just the inner wing but its only a mock up a test fit needs some more tinkering Link to comment
gordon_cross Posted March 5, 2009 Share Posted March 5, 2009 Like the man said..........Stealthy Looking at those pipes Sean, i think i should have more than enough wrap to do the job. Looking forward to having a play tomorrow. Put the kettle on fella i'm on my way Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now