Hypertech Santa Cruise Rolling Road

[terzo neil]

paul whats the address for hyptertech and could you the form as my printer aint working too well

[coulty]

Sorry guys. Due to unforseen troubles with my car i wil have to pull out tomorrow. I am upset as i really wanted to see what she is putting out after all my work.

1)PaulC555

2)GaryD NEWAGE STI

3)Terzo Neil (terzo or sierra xr4x4 dohc turbo with fmic/ stage 2 T3 turbo and mbe ecu)

4)superstar_tradesman Classic V3 Sti 555

5)young-buck27 (hawkeye sti)

6)st3ph3n - if it's no broken!

7)rallye 6

8)tommytcut

9)Des

10)Z1000 if its after 22nd october

11)JAC - Newage sti or Audi quatrro

12) Higgy

13) Scoobymark - Newage Sti

14) jk0474

15) A Marshall. ( through superstar_tradesman) Classic Terzo 3

16) G Mac

17) B9RY C

18) FrazA

19) stuarted (Classic P1 (FMIC))

20) euan_r (classic)

21) ewan (gto)

22) jim dbm

Edited November 10, 2007 by coulty

[G.Mac]

Just had a thought, will he be able to do a power run on an Automatic?

Graeme

[seafar99]

paul whats the address for hyptertech and could you the form as my printer aint working too well

http://www.multimap.com/hotels/?&t=l&a....9961:-3.889:16

[superstar_tradesman]

What figures did everyone make? I made 254.1 bhp @ the flywheel not bad for a standard car me thinks.

[des_curran]

What figures did everyone make? I made 254.1 bhp @ the flywheel not bad for a standard car me thinks.

I got 340.2bhp, for some reason it would not make boost on the rollers only reaching 1.1 bar

[G.Mac]

199.4bhp, canny remember the torque, car totaly standard with a dirty air filter, oh yea the car is 20yrs old and according to the book had 220bhp from the factory, well chuffed

(what did Terzo Neil make )

Graeme

[craig_harey]

Mine made 322.2 at fly wheel and roughly 560ftlbs at fly wheel surely this is mistake ??? check graph out below great day out though nice to meet alot of people i hadnt meet before well done Paul great day also boys at burger stall thanks for the feed . Craig

bonnet closed

[andrew_forrest]

Mine made 322.2 at fly wheel and roughly 560ftlbs at fly wheel surely this is mistake ??? check graph out below great day out though nice to meet alot of people i hadnt meet before well done Paul great day also boys at burger stall thanks for the feed . Craig

bonnet closed

Does look a bit odd Craig, doesn't your car do around 90mph in 3rd at full rpm ? Peak power at 61mph in 3rd relates to around 4700rpm ?

Std cars seem to read close to book figures but modified cars are notoriously difficult to get a reading from on a rolling road (ref my post on Pg 1)

Any other graphs available ?

Andy

[craig_harey]

yes as i did 2 runs good time apart one with bonnet open

[euan_r]

first thanks to paul and the guys at hypertech for accoomadating the northerners

second to gus and andy that were on barbaque duty.

got 231 at fly which is not too bad for a uk with 111k on the clock and only exhaust changes.

more importantly got the afr checked out which was what i was looking for.

trust a coolant sensor to through a wobbly on the way down though.

good putting a few faces to names again

[craig_harey]

here is the first run i did and forgot the advise to shut bonnet

Edited November 11, 2007 by young-buck27

[andrew_forrest]

Interesting, how effective was the tmic cooling fan ? Did it give a good blast of air directly down through the intercooler ?

Edited November 11, 2007 by Andy.F

[craig_harey]

never had a top mount feed but a good high power one head on

[paulc555]

Thanks to everyone for today...It was a long cold one, but well worth it...

Huge Thanks must go out to Duncan and the team for an excellent job and also for jumping in to fix the various issues which arose with a few of the cars....thanks for that Duncan.....

Thanks also to Andy, and his maid of hounour Gus for the Burgers and other barby delights....excellent for a wee warm up....

Thanks to Gav and YV for warming me up in various ways.....

But most of all thanks to all those who put the cars on the rollers and stumped up some hard earned. I will report back when I have sorted out with Hypertech the financials and let you know how much we made for Santa Cruise......

On another note....other graphs are available from the day...all data was saved and I can organise if anyone requires any further information on their cars performance....but would need to do this on request with Duncan.....

So thanks again everyone...Im finally beginning to warm up now.....at last.....

[andy]

It was a long cold one

You're not f****** kidding there! It was even longer and even colder for those of us who turned up when they said they would

Huge Thanks must go out to Duncan and the team for an excellent job and also for jumping in to fix the various issues which arose with a few of the cars....thanks for that Duncan.....

Absolutely. It must get a bit boring for the lads. Car on, strap down, run, unstrap, car off, car on, strap down etc etc all day, but done with enthusiam throughout. The tea urn and ready supply of hot drinks, free of charge, was particularly appreciated. Top job.

Thanks also to Andy, and his maid of hounour Gus for the Burgers and other barby delights....excellent for a wee warm up....

Glad to be able to help out. Although I recognised a few faces, it was the first time I'd really got talking to the guys on here and some good banter was enjoyed The downside is (apart from hypothermia) all I can taste and smell is smoke. The profits weren't as high from the food as I'd have liked, largely due to st3ph3n not turning up I took a bit of a hit as my donation to this year's event and the final food sum given to Paul was £50.00 - with not one single scrotum consumed Thanks again to Gus for volunteering to help with this.

But most of all thanks to all those who put the cars on the rollers and stumped up some hard earned.

Absolutely. Nice one guys

[4Hero]

452 at fly wheel for me and roughly 4370ftlbs

In my dreams

good results folks, sounded like a good day (if not cold).

[the squiggle]

199.4bhp, canny remember the torque, car totaly standard with a dirty air filter, oh yea the car is 20yrs old and according to the book had 220bhp from the factory, well chuffed

(what did Terzo Neil make )

Graeme

Only losing 1 hp a year is no gad going for an ocean liner

Good to hear everyone had a good time

[terzo neil]

yes it was a good day

still had all the cats in place with no engine mods, according to sheet it made 198.6 bhp with 205lb.ft

hey graeme at least i am keeping mines and can gain 30bhp if i take all the cats out

yours just made it on the rollers, nearly slid right off, could get over the first set atleast mines doesnt weigh over 2 tonnes

[marky.t.s]

i popped over for a wee while,jeeze it was fffffreezin man!! took a couple of crap pics...........

Andy,didnt know that was you on the burgers,sorry for not saying hello.

[paulc555]

cant believe you printed that pic of me.....arghhhhhhhhh

[stuarted]

Sorry I never made it, split a boost hose, although it sounds like it was a very cold day!

[scoobymark]

It was a Damm cold day!!!

I got 317bhp and 360lb torque

happy with the torque but guy that sold the car to me said Zen had mapped it to 360/360, so not too happy with the BHP.

Will need to be visiting Mr F shortly

[fai17]

It was a Damm cold day!!!

I got 317bhp and 360lb torque

happy with the torque but guy that sold the car to me said Zen had mapped it to 360/360, so not too happy with the BHP.

Will need to be visiting Mr F shortly

I think DD gives one of the lowest BHP readings from any RR so don't worry there ...just get a good time @ Crail

[paul555sti]

Is there a full list of figures made on the day?