tomwrx08

Cheer lads. Im in the middle of a 6. Spd conversion from an 02sti on my hawkeye wrx. I had everthing except the rear hubs as i was told my shafts would fit but they dont at the rear sti shafts are thicker so dont fit my hubs.and the ends cant bebchanged as the shafts are a different thickness. So i bought a set of hubs and was told the were complete but the twat sent me them and had cut the abs and handbrake cable.so i would need to completely strip down the hubs to replace them. So im about to send the hubs back and the garage im using have found a place that are going to make me new shafts that will fit the sti rear diff and my hawkeye rear hub.

can anyone tell me where to get these asap, have tried a few breakers etc but none, had a set lined up but the pr1ck has fecked me about and turns out he didnt have them so had to go through paypal for to get ma money back, any help or info would be much appreciated cheers tom

craig if i wasnt getting it done by mike at seditas cars who does my remapping as well then u would have been the first one to call as i know how good u are at doing clutches

well bought a 6spd exedy pink anti judder clutch and forged flywheel from aztec performance, was meant to get the parts from mark at laterl performance but he didnt have any flywheels in till tues,which is to late for me, i called r.a.motorsport , hypertech and greer motorsport but not one of the companies called me back , my money must not have been good enough for them

outstanding results mate. may have to get u to do mine once its been fixed

hi folks, well as some of you may know im currently changing my hawkeye wrx to a 6spd set up now im looking at various clutch and flywheel options. but im looking to try and maintain the OEM feel but with the beneift of taking more power. im currently running 355bhp and 355lb/ft and its my daily driver. i have no plans to increase the power as im very happy with what i have so what clutch do u have and what power are you running thanks in advance Tom

OMG what a joke they are , thats shocking,

nice job so far mate, looking forward to the rest of it,

u will find a massive difference in the way it pulls, plus will also get better fuel consumption

That looks superb.

its stunning barry.

welcome mate,

very nice mate. good results there, looks minted

johnny at elite is superb, ive had some work done by him before and wouldnt go anywhere else now

cheers for the very helpful info guys, my gearbox code is TY754VG7AA. and its an 07 hawkeye wrx.so is it the pull type clutch i have then its ure fault arch for selling me that bloody vf43 i had a look at various options, spoke to guy who was breaking a GB270 but wanted £1000 for the gearbox as it was low mileage then spoke to stevie at scottish subarus and he had one from a 06 wrx £300 so was going to get that but after speaking to stevie we came up with a plan, i was really wanting a 6spd set up but wasnt wanting to waste a couple of grand so he knew of a bloke with an 02sti that had a ****ed engine, it was one of his customers cars and he couldnt afford to fix it,so we have went 50/50 to buy the car and i get everything i need for the 6 speed set up at a very cheap price compared to some people who are still wanting 2k and more for them. so he will strip it out over the next 2 wks and will pick up all items i need for the swap over,just wanted to make sure i was getting all the stuff i needed in one run as the scooby will be in bits waiting for the stuff, cant wait to get it done now,

why whats the difference, i thought all 6spd boxes were almost indestructable??

great service from all the stafff at s@s,bought my scooby from them over 2yrs ago and there always willing to help give advice over the phone as well. they give a small discount to most scooby clubs and usually 10% off all parts with ure membership card providing ure club has this arranged with them

well after my front diff goin tits up and being quoted silly money for a replacement 5spd i have decided to go down the 6spd route, has anyone done this on there hawkeyes and had any probs, im going for the non dccd set up, can anyone tell me if ive missed anything from the list 6spd starter motor 6spd gearbox gear linkage flywheel cradle rear diff prop shaft, gearknob buying a new exedy clutch as well the parts are all coming from an 02sti so want to make sure i get everything i need, cheers tom

welcome and enjoy mate

u can pick the new gasket up at the motor factors for a few quid, think the bolts are either 14 or 17 mm

that looks really nice mate, love the front seats,

ian godney or bob(aztec performance)can do u some at good prices as they usually do group buys on scoobynet as its 4pots its around 100 for discs and 150 for discs and pads from them. http://bbs.scoobynet.com/group-buys-356/835574-294mm-grooved-discs-and-kevlar-pads-99-new-group-buy.html

be nice to see it all finished mate. subscribed to keep track of progress

very nice mate. looks stunning

i was only giving u another opinion, im keeping my mouth shut now incase u like more of them dont want ure mrs hunting me down