Jump to content

DUDE!!!!


Recommended Posts

Posted

<< Lol dude, thats timing for you, and I was only joking. >>

Yeh spooky dude face-icon-small-smile.gif

<< They do look good, bet you will be shocked to find out how long your car really takes to warm up, I was. >>

<< Needless to say water temp means nowt >>

Your right about water temp, realised the oil would take longer but still a little suprised face-icon-small-shocked.gif

What have you set your warnings to?

Boost 1.4, only had 2 short runs, peaks at 1.2

Oil Press 1.5, idles at 2 when warm, but will drop just below if backing into garage & revs drop below normal tickover

Oil temp 120 at the moment, need to lower, maybe to 100?

Does the above sound right?

<< Plan worked then dude. >>

Sure did but don't tell Debbie lolface-icon-small-wink.gifface-icon-small-smile.gif

<< So now you're ready for my next box of tricks when you come over >>

Been told to stay away from your motor next time Dude LOL face-icon-small-wink.gifface-icon-small-smile.gif but may have a look just for research purposes face-icon-small-happy.gifface-icon-small-happy.gif

Cheers

Paul

  • Replies 6.8k
  • Created
  • Last Reply

Top Posters In This Topic

Posted

<< What have you set your warnings to?

Boost 1.4, only had 2 short runs, peaks at 1.2

Oil Press 1.5, idles at 2 when warm, but will drop just below if backing into garage & revs drop below normal tickover

Oil temp 120 at the moment, need to lower, maybe to 100?

Does the above sound right? >>

Dude, I have my boost set to 1.2 as that is the peak for the standard car, that way I can tell when it overboosts as it does hit 1.3bar due to my mods.

This is just a safety as I aint got a remap, if i had i would have it 0.1bar past peak.

Oil Press I have mine at 2.5 bar car idles at 3.

Oil Temp got mine at 115.

I would set yours at 0.1 past 1.2bar so you can tell when it overboosts, or set it at 1.2bar so you can tell when you hit peak and how long you hold it, your choice.

Oil Press 0.5 bar below warm idle so yours it set right, but your idle sounds a little low, what oil are you using?

Oil grade determines the pressure in your system, I use Castrol RS 10W60 which gives me 3bar warm idle, this is also better for your engine.

It's not a big problem but maybe on your next service put some Castrol RS or Motul 300v in.

Oil Temp 110 - 120 depending on how hard you drive the car, plus how often do you want it beeping at you.

Posted

Morning Dudes,

Thanks for the info Dave Dude

<< what oil are you using? >>

Running Castrol Magnetec, dealers serviced so, should be OK, may be worth supplying my own oil at next service?

Cheers

Paul

Posted

Yeah, I got a tatty old ZZR600 that needs tidying up and putting through its test.

Will make a nice little project and with a bit of luck (ie funds permitting for buying parts for it) should be running by summer.....

Posted

Yeah all the stuff I've found says it's a brill bike but not great suspension.

Needs a fair amount of work doing but I'll enjoy it and will know the bike inside out when it's done. face-icon-small-happy.gif

Posted

<< Yeah all the stuff I've found says it's a brill bike but not great suspension.

Needs a fair amount of work doing but I'll enjoy it and will know the bike inside out when it's done. face-icon-small-happy.gif >>

So Jim she will be ready for TT Week then dude...face-icon-small-happy.gif

Posted

Well I'd love to say yes but it will depend how quick I can get the bits I need and when I can get it through its test. Just got it back to the mrs house though so at least I can start pulling it apart now to get it all done up....

Posted

My bike-in days are over now .....face-icon-small-wink.gif

I was always coming off my bike , It was a Honda 125 twin...face-icon-small-blush.gif

But before the age limit came in on the Island I had a Kawasaki 305cc scorpion and it was belt driven..face-icon-small-happy.gif

I hope Jim dude that the Legacy is not going to be put on the back burner...face-icon-small-shocked.gif

Posted

<< Not at all mate. Why myself and the good mr Custom have just been discussing it the old shed..... face-icon-small-happy.gif >>

THE OLD SHED !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!ft> face-icon-small-shocked.gifface-icon-small-shocked.gif There is life in the old dog yet Jim dude...face-icon-small-wink.gif

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...