WUZ

How did you get on with the moroso sump?

Err - what Moroso sump??? Never had one, never will.

Yep

Got to remember that the good old days seem to be gone now, not happy about it but us hardcore track day-ers still continue to go ( that was actually my 29th track day at Knockhill and my 74th track day in total) but I feel that a lot of the casual goers were not interested in this one due to the time of the year.... And the fact that there was still snow on and around the track on Thursday night.

I know I had fun as did Ali, can't wait for the next one!

Russell

Really like the jdm blob.

I am quite pleased with how she ran tbh, standard apart from suspension and an exhaust.

I touch goats

Russell

If there is a Prodrive a spoiler on the car and the lights have been blackened......... That'll be my old spec D

She had 27k on the clock when I sold her 2 years ago.

Russell

The cut is pretty tidy actually and my IC was a nice fit to it, it's the bumper bar that's rough as ****

Course it was........... you know who cut it and not a set of tin snips in sight

Only other time I am down your way is for the TrackScotland Knockhill track evening on the 4th of July (Wednesday)?

Any use?

Russell

"ain't no replacement for displacement"

Russell

Are you running a sandwich plate Graeme?

I just don't want to try fitting in the block and end up damaging threads in block and need to strip out engine to fix.

I've fitted over 15 sets of defi's to Scoobs and NEVER stripped the threads on the Block when removing the blanking plug or refiting the Brass adaptor plug.

WORST CASE - you'll use a cheap Allen Key and round the hex hole on the blanking plug.................. then fit the sandwich plate.

TRUST ME - YOU'LL NOT HAVE AN ISSUE.

In fact - if you want to wait until I get home, bring the car to Ingleston on the 1st of July (we're having a sprint event there, your welcome to watch) and I'll loosen the blanking plug and fit the adaptor with the Oil sensor in there...... FOR NOTHING!!!!

Would that help/inspire you?

Russell

As Ciaran says - it will be fine if you use the right tools.

Best to read temp above Cyl#3 as it is the hottest point for the Oil so you can see what's happening temp wise and monitor your oils condition better.

All Scoobs run a 10mm Brake Flare nut

good good, doing what I really should be doing instead of adding horses!

Having had another look, I also recognise that knob! Wondered how himself managed to procure an original one so quickly!

I think your one came of a certain P1

So, is the SDM Gearbox cradle ready to ship out or did you receive a test item to check?

Good to see you guys going from strength to strength Grant, Merry Xmas to you and the guys too!

Russell

PMSL

BHP developments WUZ on here he is based up Elgin direction

there is also an Aberdeen scoobies website

http://aberdeenscoobies.invisionzone.com/index.php?

Ciaran............... I'm near Inverurie mate, how many times do I have to tell you......... LOL

Walls, that is achievable.

I have a spare WRX ECU with an EcuTek licence on it that can be fitted and mapped to your car and immobiliser for 450. Service would be about 260. MOT and tyres however, would be a local thing (depends upon whereabout you are in Aberdeenshire, where are you?)

If you are near Inverurie (I'm a little nearer Pittodrie House hotel than Inverurie myself) then Jim King for MOT and Graeme @ Tawse Tyres can help.

Get yourself over onto Aberdeen Scoobies Forum for the more local gen.

COME ON GUYS - SPREAD THE WORD!

I have heard a rumour that a certain White Hawkeye from Aberdeen - that has never seen rain or snow in its life - might make an appearance

That patch in the middle of your hose is where a stainless steel metal retaining "t-piece" is placed. It keeps the Jubilee clips in a certain rotation so you can reach it with the screwdriver to fasten/loosen it.

It is meant to be there and be like that.

Aye but the real "hardcore" track-goers have already been to Germany - when the weather was good

That's why were going to K/H on the 17th

Russell

Last I heard, JohnS sent out a bulk email to all of us currently signed up for the above event, informing us that if we didn't get any more entrants, they might have to cancel due to lack of numbers?

Anybody heard anything else?

It would be a shame to have this happen, where are all the track monkeys these days????

Has the SIDC considered opening up the trackday to other forums (those "nasty" Evo boys, for example)?

Russell

Get the Wiseco Drop in pistons, leave the OE rods in there, they'll be fine for 500bhp.

Go for the Cosworth 280,000psi-rated Head studs and OE Steel Head Gaskets to handle the extra boost.

SC46 (Billet Wheel) would be a perfect turbo for the RB.

Bear in mind any more mods will require an uprated clutch and probablly a set of 650's AS A MINIMUM, if not a set of 740's for breathing room at the top end.

Lewis - you should have said the wing was in Newcastle as Ali and I left there yesterday afternoon on the ferry to Holland for our Ring Trip.

Russell

I'm more worried about what Cathy was looking at in the first picture

Russell

Sounds like a plan to me Dale. Should be a pretty good discount on offer for such a large order!

Me too. Anyone else in?

1 - Warrior08 - Full set - Newage - Black with pink WRX logo. (Derbyshire) (WRX)

2 - Ryan@Indigo-GT - Full Set - Classic - Black with Pink Type R logo (Gwent)

3 - scoobygaaz1 - Full set - Classic - Red with Black Impreza Turbo logo - (Devon)

4 - cpd full set - 2006 Hawkeye WRX. Car is WR Blue so guess mats should be blue or black with WRX logo (Buckinghamshire)

5 - Scooby_my99 - Full set for Classic. Carpet colour = Navy Blue; Edge and Logo colour = Grey; Logo = 'Prodrive' (see attachment) - (Grangemouth)

6 - Andy - Full set - GB270 - black with GB270 logo. (Central Scotland)

7 - Frenchy - boot carpet - Newage - Black with Pink Sti Type UK logo (Cambridgeshire) £25.00

8 - Spec T - full set in black with WRX Spec T logo in silver grey down the side if possible? MY2006 Hawkeye WRX saloon. (Devon)

9 - Van Diesel - full set in black with GB270 logo. Hawkeye Wagon (Cambridgeshire)

10 - Lewisscoob - full set - classic saloon - black with silver typeRA logo as per Phils set with a red outline - Aberdeen

11 - Marko72 - Boot mat - To match up to existing WR Blue mats.

12 - ScoUK - Full set - Newage - Black with red IMPREZA logo down side

13 - Major - Boot Carpet - Newage - Black with Pink STi Type JDM logo (West Sussex) (Same price as Frenchy ????)

14 - Paul555sti - Full set in Black - Newage - With white Sti type UK logo.

15 - weedman - Front mats only - Newage - Black with GB270 logo (Glasgow)

16 - dougieboy - im looking for a full set of mats for my 2006 hawkeye wrx, black with impreza wrx logo in blue. carluke.ml8

17 - WUZ - Full set - Newage STI (inc Bootmat) - Black with BHP Developments logo (if possible)

18 - spenno - Full set - Newage - Black with STI and Type UK logo in pink (Dundee)

19 - smike - Full set - Newage - black/dark grey with pink STI Type UK logo (Reading)

20 - 733tCaptSteady - Full set in Black - Hawkeye - With Blue Sti and Type UK logo. (Worcester)

21 - simmydigit - Hawkeye front mats only - Black with GB270 logo (West Yorkshire)could also collect from Glasgow or Ayshire if postage easier!

22 - JamieR85 - Hawkeye Saloon full mat set - Black with GB270 Logo

23 - Cruz104 - Full set World Rally Blue with pink sti logo and yellow outside edges for a blob eye wrx sti

24 Bigred rob full set black with gb270 logo down the side

25 - H 5CBY - Full set - red with WRX logo - classic

26- stevspecb add my order for a full set in WR blue with WRX Logo- blobeye saloon

27 - thefastone - Black set (no boot) with STi Logos (For Classic)

edited mine to show it is an STi