notsosmall

There not cheap Let us know how you get on at the motor factors ect, I could do with renewing mine after having trouble getting them out and bending the ends last time

Did no one else notice the user's name that posted it? MAKESSTUFFUP !? Still got to be worth someone with buggered shocks trying out though

I seen this car in the flesh at Alford yesterday and it looked great good work

I think these look good http://www.revolution247.com/zero-sports-c...ru-77853-0.html

The suspension will be different I bought bugeye springs thinking they would fit a blobeye, the fronts fitted but the rear is different Nice wheels though I just got a set of the ones you just sold back powder coated gloss black

Very good result Car look as it should be MINT, hope Bobby's going to read the correct washing post and keep it that way I would so love that spoiler!!!

Looks good mate Great improvement

The Werkstat Acrylic kit is really good stuff, The Jett is really easy and a pleasure to use, Layer it up and it gets better and better and easier and easier each coat you apply Here's a pic of mine wearing 7 layers applied an hour apart

I know AWD in perth can do a CEL light fix by soldering in a small add on that reduces the voltage some how and prevents the CEL showing for this fault Would be worth contacting them to discuss very friendly and helpful people, im sure it wasn't expensive either Here's there contact details: AWD Motorsport Engineering Unit 5, Inveralmond Way, Inveralmond Ind. Estate, Perth, PH1 3UQ, Telephone: 01738 633336 Email:sales@awdmotorsport.co.uk

Yeah ok so it can shift and would be fun on the track BUT its still a s****ron AX

Not my thing But they do look good

Hello and welcome Nice looking Scooby, really like the black wheels

1. Bobby C - GB 270 - 340 BHP 2. Mag C - Type RA ver 2 - 280 BHP 3. kennyuk300-UK300 - 265 BHP 4. imy - ver 2 STi Type RA V-Ltd - estimated 310bhp 5.wrx kenny wrx approx 245bhp 6. Scotsman - Bugeye WRX Wagon - 306bhp 7. Notsosmall- Blobeye WRX approx 245bhp

well i just found the answer out the hard way Its.... Fronts yes :madnoel: Rears NO so went out at tea time started with the front done in next to no time, then onto the rear had a job getting the strut bolts off only to strip it down and find that the spring does not fit Mine MY03 Blobeye narrows at the top the replacement from bugeye doesn't and is the same width all the way up so had to rebuilt standard rears not too happy at the moment, will see how it looks i the morning :roll: and strip the fronts again :cry: unless anyone has standard Bugeye shocks lying about i can try?

Ah ok cheers List updated then 1. Performance Friction Z-Rated pads front Brembo - Arch 2. Westtra - Front DS2500 for Hawkeye STi 3. ScoUK - (DS2500 Front pads for standard newage WRX01 4 Pots) 4. STI Pretender (DS2500 Front and Rear pads newage STI06 Brembos) 5. Kaylz555 (Red stuff) 6. Scoobnoob (PF Z-Rated pads, 326mm PF front discs, to fit a brembo conversion on 96 classic sti ra) 7. s25yme - (DS2500 Front pads for standard newage WRX06 plus front discs.)

1. Performance Friction Z-Rated pads front Brembo - Arch 2. Westtra - Front DS2500 for Hawkeye STi 3. ScoUK - (DS2500 Front pads for standard newage WRX01 4 Pots) 4. STI Pretender (DS2500 Front and Rear pads newage STI06 Brembos) 5. Kaylz555 (Red stuff) 6. Scoobnoob (PF Z-Rated pads, 326mm PF front discs, to fit a brembo conversion on 96 classic sti ra) 7. s25yme - (DS2500 Front pads for standard newage WRX06 plus front discs.) 8. Performance Friction Z rated pads all round standard newage MY03 WRX

1. Kinghorn - STI7 - EcuTek Tweek 2. stuarted - P1 - Apexi tweek 3. Rice Rocket - WRX - Tweek 4. sti_steve - 03 STi PPP - Ecutek custom remap including licence 5. Cullenmin - Type R - Apexi tweek 6. ~ ~ Cal ~ ~ - sti'd WRX - Apexi tweek 7. Sake-Bito - 2007 STI - Ecutek custom remap including licence 8. Ciaranrb5 - RB5 - Ecutek tweek 9. Steveo_8 - P1 - Supply, fit and map Simtek(possible anti lag) 10. Dan Terzo - P1 - Ecutek custom remap including licence 11. LewisScoob - 99 UK Turbo - Fitting decat and Nur Spec R, not sure what I need?! 12. Gordyq - Type R - Apexi Tweek 13 Playsatan - simtek tweak 14 Col 666 - STI 9 - ECUTEK custom remap including licence. 15 WUZ MY06 STi (DBW) EcuTeK custom remap and licence 16 W88CHY MY02 STI PPP EcuTeK Custom Remap and Licence 17. HI_JAC - ECU change to simtek, licence paid with anti lag and launch control. 18. ton246- My own Apexi fitted & mapped 19. Rheid - 2007 STi - Ecutek custom remap and license 20. Notsosmall- MY03 WRX Ecutek custom remap and license Lets hope we can get some more off now there's 20!?

Looks really good mate, personally not too sure on the white alloys cant really decide if i like them or not I have the same BOV, turbo smart supersonic

No one knows then ??????????????

As per title, will they fit? I have the chance of a set of Eibach Pro-kit lowering springs just want to make sure they will fit Cheers

yes true m8 I just used a few small washers to replace the spacer, seems to have worked well and they look identical to klc32's when fitted

You can modify the Klc30's to fit the same as klc32's, all you need to do in bore out the 8mm hole to 10mm that same as the other end and replace the bolts, washers ect I have just done a set to fit my car I had to buy the bolts, nuts and washers in bulk to get the correct ones i wanted so have extras

Yeah sounds like droplinks, i just changed mine because they were knocking seems strange that you only noticed it after the springs were fitted though!?!

I was there today too But my pics are cr4p and not worth showing