craig mac Posted March 15, 2006 Posted March 15, 2006 Lads. Your email does not work!!! You lads did a back box for me and welded it straight to my centre section as there were no flanges in stock You were to fit one when they were in stock, do you have them NOW? I would very much like to get this done as soon as possible please, any day this week or next i can pop up Craig 05 sti
craig mac Posted March 15, 2006 Author Posted March 15, 2006 Cheers JC Its good to be back Still a little tender though but they say 6 weeks and i will feel as if i never ever had sciatica!! or my discectomy Was readmitted with an infection too so had 2 weeks in ARI never again i tell you. Also contracted MRSA [:@]in the wound!!!!!!!!!!! But that is away now thanks to some MENTAL iv antibiotic Not allowed to drive for another 5 weeks so there is an 05 sti PPP with a few mods[][] sitting doing nothing[] 5 weeks HUH we will see!! Craig
fai17 Posted March 15, 2006 Posted March 15, 2006 nice to see that you are back and well..take care of yourself m8
Adam Kindness Posted March 15, 2006 Posted March 15, 2006 funny that.... a flange was cut off my £500 ceramic coated manifold, to weld the manifold to the system. Nice and simple to remove now! Not. Russ/Gav - any chance of having flanges welded on here like i thought we talked about?
Iaing Posted March 15, 2006 Posted March 15, 2006 You wont get any joy e-mailing them. I never did. They still owe me a boost gauge. I have a fully sleeved WP special. Really handy for fitting the flanged centre cat come mot time... Dont get me started.
craig mac Posted March 15, 2006 Author Posted March 15, 2006 So We have one or 2 folks looking to get jobs corrected as promised. When is this going to be done lads? Looks like a few folk have some unfinished business with Wallace[:@]. Can you please contact me ASAP prior to me arriving at your door, to aarange to get this work finally completed Craig[6]
craig mac Posted March 15, 2006 Author Posted March 15, 2006 Sorry Folks But back to the top till i get an answer!!! Adam do you know if Fee ever get her Link sorted out? Craig.
Carl Davey Posted March 15, 2006 Posted March 15, 2006 Do people not use the telephone these days? Gav has always responded to my voicemail. 01224 708444 / 07803 183837
craig mac Posted March 15, 2006 Author Posted March 15, 2006 Strange that Every time i have phoned them i get no reply ? Craig
Fee Posted March 15, 2006 Posted March 15, 2006 Sorry Folks But back to the top till i get an answer!!! Adam do you know if Fee ever get her Link sorted out? Craig. No...something wrong with the KL block apparently. I've just given up.....it doesnt go on at all anymore so it's like its not even there!!!
Carl Davey Posted March 15, 2006 Posted March 15, 2006 Maybe you smell? [] [] I haven't even left a message (just my number in his missed calls list) and he's rang me back. I'd just keep on trying until he answers. He even has a secretary to help answering the phone now too!
craig mac Posted March 15, 2006 Author Posted March 15, 2006 So its money spent and no goods? Seems to be a patern forming here Gavin................ Look forward to your reply Wallace Performance[8o|] Craig
stephen_cheyne Posted March 16, 2006 Posted March 16, 2006 Yeah, sorry to have to say it but I heard a bad report today about some exhaust work they did on someones car too.
craig mac Posted March 16, 2006 Author Posted March 16, 2006 Gavin? Dont you think its about time you did something to try and repair these outstanding issues? I will be up sometime this week! See you soon Craig Anyone else available that need work/promises completed? Not that am bothered going up myself like[]
craig mac Posted March 16, 2006 Author Posted March 16, 2006 Still no reply and no anwser on phone? See you tommorrow boys, Hope you flanges[] Craig
craig mac Posted March 17, 2006 Author Posted March 17, 2006 See you tommorrow lads Hope you have them in stock and you can complete the job Craig [6]
Russs Posted March 17, 2006 Posted March 17, 2006 See you tommorrow lads Hope you have them in stock and you can complete the job Craig [6] Please drop in whenever it suits you, I am still at work now and am here from 8.30am to midnight most weeknights. As such I don't have time to check forums frequently, and I'm sorry but we don't conduct business on here. Please come in or call anytime, and I would estimate that 95% of emails are answered. I am sorry if we have missed your email. I would imagine that more than 99% of telephone calls are answered, and as mentioned we are employing more staff to help deal with these issues. Unfortunately we are victims of our own success - we are very busy. Exhausts. Customers are always asked if they have any particular requirements when a car is booked in. Flanges are only removed after a customers go-ahead, and that was the case with your car Adam. If you are unhappy please call me to discuss what we can do to rectify this. I think it is a little unfair if you are blaming us for the knocklink not working. It was a an already compromised 2nd hand part you gave us to do nothing more than fit, and it was working when the car left here. If you feel agrieved Craig, please book your car in and allow us to resolve any issues, including refitting flanges if that is what you choose. We will do our best to fit you in as soon as we can, but please be aware we do have lots of advance bookings. We cannot drop other customers tomorrow, we might end up on a forum getting slagged off! [8-)] Iain, we have plenty of other boost gauges available to you , but as I explained the gauge you has not proved simple to get hold of again. You will know it was not a common boost gauge. Please come in some time and take your pick or order whatever takes your fancy. Russ
craig mac Posted March 17, 2006 Author Posted March 17, 2006 Russ Not slagging just a little pi55ed that it has never been put right as agreed at the time m8 So if you can cut and weld the morn that would be great Craig
Russs Posted March 17, 2006 Posted March 17, 2006 Russ Not slagging just a little pi55ed that it has never been put right as agreed at the time m8 So if you can cut and weld the morn that would be great Craig I understand why you are not happy. You will probably also understand why to me this thread appears to be "slagging". I have said above that we have lots of advance bookings, but please call tomorrow and we will do our best to fit you in asap. Tel. no. is 01224 708444. Thanks.
Adam Kindness Posted March 17, 2006 Posted March 17, 2006 Russ - I gave the go-ahead because you said 'and weld on a new one' LOL I should be back in UK in a week or so, we can take it from there.
craig mac Posted March 17, 2006 Author Posted March 17, 2006 Russ Even you email does not work m8 [:|] Craig
Russs Posted March 17, 2006 Posted March 17, 2006 Russ - I gave the go-ahead because you said 'and weld on a new one' LOL I should be back in UK in a week or so, we can take it from there. Ok, thanks Adam, sorry if there has been a misunderstanding. As you know it's not like we can ask you to nip round and clear something with us! IIRC the flange on your new downpipe was a mile away from you old system, in length and alignment. We'll do our best to sort it to your satisfaction. We have a very experienced exhaust builder back on board.
Russs Posted March 17, 2006 Posted March 17, 2006 Russ Even you email does not work m8 [:|] Craig Really?! I have just been answering several other emails! Will look into it, sorry.
Adam Kindness Posted March 17, 2006 Posted March 17, 2006 yup..... every mail i send you gets bounced back. So i dont know if gav has passed on the info, or if he indeed got the mail either? Did you get the mail about thr RR plot, what was checked on the car, and the Clutch/Flywheel setup? This is the error being returned... Your message did not reach some or all of the intended recipients. Subject: Corsa: loom Sent: 09/03/2006 19:47The following recipient(s) could not be reached: russel@wallaceperformance.co.uk on 14/03/2006 20:02 Could not deliver the message in the time limit specified. Please retry or contact your administrator. < internet.csl.co.uk #4.4.7 SMTP; 451 Temporary local problem - please try later>
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now