Geometry in the south east?

[Jiggerypokery]

Hi folks,

Can anyone recommend a good garage in the south east to check geometry and alignment, or should I plan a day trip to powerstation? Anywhere within 150 miles of kentish land is ok.

I have a WRX03, which apparently doesn't need the bump-steer mod (with shims etc), just a geometry setup.

Thank you.

[Pele]

Try Elite in Rainham - they did mine and it was like driving a different car on the way back Costs about £50 to check and if anything needs adjusting it's 9.95 per corner - ask for the Prodrive settings

[j-k]

That will be ELITE in Rainham Essex not kent...just off the old A13, ask for keef..he is familiar with the prodrive set up etc

[Jiggerypokery]

Thanks again! I'm getting tired of this understeer

[Pele]

You won't be dissapointed

[numptyboy]

Barretts Motorsport in Canterbury do a good job as well on : 01227 864537 and ask for PHIL

Joe.....

[Tiny]

<< That will be ELITE in Rainham Essex not kent... >>

[AllenJ]

Elite did mine as well, but a slight warning, your rear tyres will wear out quicker with the prodrive settings but the cornering will be a lot better. It's the price you have to pay for good handling.

[riceboy]

Like numpty said, Barrets Motorsport in canterbury. They use their own settings and as they used to rally a winning scooby, it sure enough does for me>

[Cheshire Cat]

I had mine done locally cost was £25 to check then a hell of a lot more for each corner but depends what you have done. I think it was £40 for tracking (single axel) and £15 ish for camber etc per corner.

I was advised against the Prodrive settings for daily road use as tyres would suffer due to the camber settings being quite radical!

Edited: You will need the Bumpsteer mod to totally eradicate the understeer, or buy an RA!