Gavpo Posted June 26, 2017 Share Posted June 26, 2017 (edited) Hi all bought a my99 uk turbo and the alarm is dead. Keypad blinks loads of times when pushing button with the ignition on but does nothing when ignition is off. Keyfob blinks as it should but alarm does nothing. Car starts and drives. When starting car occasionally get a chirp from alarm but that's it. I have the original keyfob and serial number and original pin code card. I am asking if anybody can send my the original installation wiring diagram as would like to get alarm working again. Looks like the wiring has been chopped about behind drivers dash. Also does anybody have any pics of vacuum hose setup from turbo to boost solenoid and any other boost pipes. I have looked every,spent hours trying to get info on the original layout of the hoses.I know im pushing my luck but only just bought the car.(mad bad impulse buy coz I missed having a Scooby so much) now kicking myself and contemplating breaking it for parts Edited June 26, 2017 by Gavpo Link to comment
Gavpo Posted June 26, 2017 Author Share Posted June 26, 2017 that's a great start thank you. Looks like i,m looking for a 2 port solenoid as it has a three on it for some reason. Any more hose diagrams from engine bay ie canister area. Actually all diagrams if you have . Thanks buddy Link to comment
Gavpo Posted June 26, 2017 Author Share Posted June 26, 2017 (edited) what connects up to the turbo feed pipe on the larger connector. (above the "O" of opposed) hth. Its been blanked?!?! Edited June 26, 2017 by Gavpo Link to comment
The Don Posted June 26, 2017 Share Posted June 26, 2017 There are two connections the larger is the return from the dump valve( pipe item 5 below) , the smaller the connection to the PCV valve (pipe item 2 below) Belo just to show the turbo inlet pipe connections Link to comment
Gavpo Posted June 26, 2017 Author Share Posted June 26, 2017 Thanks mate will compare tomorrow and get back to you. this for uk my99/00 yeh? Link to comment
Gavpo Posted June 28, 2017 Author Share Posted June 28, 2017 UPDATE Alarm sorted... Blown diode on main ecu. Link to comment
ScoobieFloz Posted June 28, 2017 Share Posted June 28, 2017 2 hours ago, Gavpo said: UPDATE Alarm sorted... Blown diode on main ecu. Did you sort this yourself? Link to comment
Gavpo Posted June 28, 2017 Author Share Posted June 28, 2017 Yes mate.Main power input diode 1406 written on it .surface mount but replaced it with 20v 1amp diode AND IT WORKED {not smd} Link to comment
Gavpo Posted June 28, 2017 Author Share Posted June 28, 2017 I do like an electrical challenge. What I don't like is not being able to find run of the mill bits that usually get thrown away......proper mission to get 2 port boost hoses with pill and solenoid multiplug...some twat fitted at 3 port.messed with wiring.no remap and wondered why it overboosted../now im back tracking Link to comment
Gavpo Posted June 28, 2017 Author Share Posted June 28, 2017 2 hours ago, scoobiefloz said: Did you sort this yourself? yes mate. Quoted £350 for rip out and replace and part cost 9p ...love it 1 Link to comment
ccrien Posted June 29, 2017 Share Posted June 29, 2017 9pence, you were ripped off then,. Shouldn't have paid more than 7 pence! Seriously though, nice to read this fix. Well done. Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now