What I Have Been Upto

[Guest sti3_lewak]

Took me 3days but finaly

Before

And

After

Still a bit todo but good so far i think

Thanks

Dave

[edmondo]

[Guest sti3_lewak]

Just have an issue with my idle which have just been told can be fixed with either plugging in the ecu or with a voltmeter.... just waiting on Big D to come back with an answer to how i do this with a voltmeter

Edited April 10, 2010 by sti3_lewak

[edmondo]

oh dear............has this happened after you started taking stuff apart?

[Guest sti3_lewak]

Yeah i removed the Throttle Possition sensor but didn't mark its possition so have to reset this as its idling at 2500rpm

Iains doing some ressearch on which pins i need to connect to so i can fix it for action day

But she runs.

When sorted i can sort the coolent out but she's good

[Big 'D']

Yeah i removed the Throttle Possition sensor but didn't mark its possition so have to reset this as its idling at 2500rpm

Iains doing some ressearch on which pins i need to connect to so i can fix it for action day

But she runs.

When sorted i can sort the coolent out but she's good

Research done

Cheers Iain

[Guest sti3_lewak]

Thanks again Guru..... what would we all do with out you ????

Cheers

Dave

[rae_sti]

did you just paint your inlet manifold , or was it a refurbed one ?

[Guest sti3_lewak]

Removed the intake.... stripped it down removed the old paint then degreased it.... then primer was added then the paint... all done by me... not a refurbed one

[edmondo]

Thanks again Guru..... what would we all do with out you ????

Cheers

Dave

echo those sentiments

[Guest sti3_lewak]

I owe him a beer or something

Better still i'll get him a stacker burger at the next meet i attend

[Guest sti3_lewak]

The guru stricks again

[Big 'D']

The guru stricks again

Is that sorted then mate?

Cheers Iain

[Guest sti3_lewak]

Can't believe it was that rubber bung that gave me a head ach

[Big 'D']

I can

Cheers Iain

[Guest sti3_lewak]

Were do you get this information from Iain....

You explained it in so much detail that you must be a walking book on subaru's...... Your like kwikfit (what else can you do)

[monkip1]

Looking gooe leak, Is that hi temp paint on your manifold?

[Guest sti3_lewak]

Yeap Hi Temp paint.... Though you don't need it i also gave it a primer with Acid 8 1K etch Primer. Helps with rust mainly not that the intake needs it but using it for parts that do rust helps.

[Guest sti3_lewak]

Small update

Decided to spray my FMIC pipes

Also so small parts inside are currently drying off plus the wipers got a sand down and respray

[edmondo]

looking good Dave

[Guest sti3_lewak]

Thanks

Can't spray the pipes that go into the wing and down the front of the engine as i have very little paint left, and don't want to spend more till end of month. action day soon so need some for that

[edmondo]

I am sure you will find something there