steveo_8

My P1

i wouldnt be to sure best bet would be to email andy and see if he can source the parts. I would think he will be able to get them as he builds the turbos.

P1 because i own one or Type R

Here are mine.

i will be there.

Tell me about it i hardly slept last night!! Prob wont tonight either as i cant wait to drive it again!!!!

He said today that he is booked 6 weeks in advance!!!

Spec is Impreza P1 td05 20g fmic 550cc injectors 3" exhaust parrallel fuel rail fpr fuel pump induction kit Depending where it goes on the rollers he recons as low as 375bhp and could be as high as the 400bhp mark will have to get it to the rollers though. Also running it with no dv sounds amazing!!!!!

Got the car mapped today from andy forrest!! Had a few problems to start with one off my injector seals was torn so fixed that then it was something else with the same injector so ended up replacing the whole thing then it was time for road test. Very pleased with the car now cant stop smilling!!!!

pics of my induction kit now up.

sorry my man dont knoe anything about it. the engine bay looks a bit shabby!! wait till the right one comes up dont rush in you will get a good one eventually. i bought mine from isle of man!!!

kinghorn You have got loads to do. ive just got my induction kit to fit which is being a pain in the backside as its so big can hardly fit it in!!! Then centre pod for gauges. boost, oil temp and oil pres!!!!

seen this aswell!! will be trying it on the alcons.

can i ask how much it was? ive got about 4 or 5 dents needing done.

col666 to be honest iam not sure if it makes any differance!! sure someone here knows. iam just going on what andy forrest and harvey smith have said.

Got my FMIC done by harvey smith and done the rest myself. Still got my induction kit to fit then my xenon lights to do.

Just a some pics off the car after adding a few extras!!! Turbo,injectors,fuel rails,fuel lines,fuel pump,fuel reg,exhaust,spark plugs,induction kit,FMIC,boost gauge,oil temp gauge,oil pres gauge. It all started with a crack in my old exhaust so i decided what the hell new exhaust!! so i bought a 3" roger clark down pipe and centre section with a h&s back box. Then the FMIC From harvey smith. Next i went down to see andy forrest who's workshop is 5 mins from my house, so i bought my TD05 20G and some 550cc injectors the rest i picked up from here and there. Also andy forrest is doing the remap going for a simtek and running with no dv!! which is booked in on the 15th on july. hope use enjoy the pics. excuse my mother in that one!!! Pic of the induction kit!!!

sure am buddy cant wait just doing the finishing touches!!! Ps Thanks for setting this up.

July 15 Steveo_8 - 10am simtek with anti lag (P1) 16 17 21 Cullenmin - 1pm - Apexi Tweek 22 28 29 30 August 4 6 7 18 19 20 21 24 25 26 27 28

1. Kinghorn - STI7 - EcuTek Tweek 2. stuarted - P1 - Apexi tweek 3. Rice Rocket - WRX - Tweek 4. sti_steve - 03 STi PPP - Ecutek custom remap including licence 5. Cullenmin - Type R - Apexi tweek 6. ~ ~ Cal ~ ~ - sti'd WRX - Apexi tweek 7. Sake-Bito - 2007 STI - Ecutek custom remap including licence 8. Ciaranrb5 - RB5 - Ecutek tweek 9. Steveo_8 - P1 - Supply, fit and map Simtek(possible anti lag) 10

1, Rallyfever and The Wife 2, Zeolite 3, Gus The Bus 4, Spaceman 5, G.Mac 6, sKunk 7, NKWRX + Jr 8, Cruz 9, JSFB 10, Steveo_8 (as long as the car is ready)

any news on this?

1) jim dbm 2) Richie 3) craigdmcd - depending on price 4) Wilky0302 - depending on price/dates 5) Mikeyorr - depending on price/dates Possibles 6) Jus 7) NKWKX - wants to be persuaded 8) gordyq - interested if map can be done far enough in the future? 9) Frank C - might be interested - depends on funds. 10) Stubaroo - depends on funds 11) Joe G - Depend on funds and deciding on which exhaust to get 12) Typer666 - depends on date/price 13) Turboted 14) uRaBu5 – the sooner the better – when i gets fixed 15) njoy - depending on price/date - the sooner the better 16) steveo_8 - depending on price/date

i could be up for this. need dates though. still need to buy some more goodies!!!

my brother has had the same problem with this on his evo he is on the seconf set and they are also warpped!!! All you can do is send them back. the more i read about this problem the more iam put off from getting a set!!!