kinghorn Posted February 7, 2007 Posted February 7, 2007 so whould i see better gains using an AVCr and ecutek rather than an ecutek and any other boost controler
~ ~ Cal ~~ Posted February 8, 2007 Posted February 8, 2007 Russ - after my remap I will be paying you a visit....... I have always used the WP Dastek rollers as a benchmark after every remap. It's a more consistent approach The WP rollers have revealed 215bhp, 230 bhp., 250 bhp, 280 bhp for me in the past and hopefully 320 bhp on my next visit.......... I like the fact that all the previous dyno runs can be put on one graph for comparison purposes Cheers Cal
kinghorn Posted February 8, 2007 Posted February 8, 2007 ok i might be back in for this, provided i can get it done in april, i am willing to put down a deposit
~ ~ Cal ~~ Posted February 13, 2007 Posted February 13, 2007 Name - Confirmed - Type of Map - Car - When - Willing to pay Deposit ? Cal - confirmed - existing Ecutek (2hrs) - WRX2002 - April - Yes Cullenmin - MAPPED! Craig79 - MAPPED! JTM - Yes - Ecutec (+ licence) - '00(bugeye) JDM STI - 19th Feb - Yes Sc00bar00 - Yes - Remap - 02 UK STi - 31st Jan. Onwards. Scientific steve - Yes - Apexi remap existing - MY98Type R - 26 feb - Yes asmckay - MAPPED! st3ph3n - confirmed - ECUTEK + Map - MY05 WRX - 12th of March (booked) Spaceman- yes - Ecutek (+ license) - 05 WRX- 12th of March (booked 1pm) jimser-yes-ecutec(+license)-05wrx-9th march-yes ******************************************************************************************************* Lads - I have now confirmed with Andy ( albeit I may shift the date a day or two.......) Have changed my status above Moan the 300 bhp / 300 ft lbs torque ! Cheers Cal
craig_harey Posted February 13, 2007 Posted February 13, 2007 Andy contacted me to say he can do my map on the 23rd feb and i have replied to him and got a reply saying he is away till 17th feb so i havent sent deposit but will once he contacts me . Craig
~ ~ Cal ~~ Posted February 13, 2007 Posted February 13, 2007 I just called him, his wife will likely respond to your email as he is mapping a car in a world where palm trees & rum are the norm ! CGS
~ ~ Cal ~~ Posted February 13, 2007 Posted February 13, 2007 Aye....... This is the beast he is working on ..................it has now been fixed and has a LOT of ponies ! CGS
craig_harey Posted February 13, 2007 Posted February 13, 2007 Just recieved an email for her cal im in for 23rd at 2 pm after awd fit rest of my h&s decat system i have back box on my car allready and had it on rolling road on friday it is a my55 wrx 2.0 it had 200 bhp at 5500rpm at the wheels is this good for standard wrx and what will i have roughly after full h&s system green cotton filter and my remap by mr f, Craig.
st3ph3n Posted February 13, 2007 Posted February 13, 2007 Craig, 200 is about right. Mine made 207 at the wheels with the deresonated centre too. Also, when everyone talks about the Model Years of their cars is not the registration dates but just the model variant. So there was no MY55, just MY05. Which is the "blobeye" with some revisions - which in the case of a WRX is distinguishable from the MY03-04 WRX because it has red brake calipers, the upgraded interior (cup holders by the hand brake not pop out above the radio) and the inverted rear struts that you can't see!
~ ~ Cal ~~ Posted February 13, 2007 Posted February 13, 2007 That's me booked in for 2nd April.............CANNOT wait ! Either need to get a TD04-H or stick with the VF35 before then ! Cal
arch Posted February 25, 2007 Posted February 25, 2007 Cal I asume it is OK to still add to this GB. Andy is aware of my car anyway. MY05 WRX needs ecutec licence etc, deposit no problem if required. cheers Arch
JohnSt Posted February 26, 2007 Posted February 26, 2007 Arch, your car and YBs are very similar in spec with the exception of a couple of extra wee bits on yours so you should be very pleased with results. YB, nice to meet you the other day []
~ ~ Cal ~~ Posted February 26, 2007 Posted February 26, 2007 Cal I asume it is OK to still add to this GB. Andy is aware of my car anyway. MY05 WRX needs ecutec licence etc, deposit no problem if required. cheers Arch Hi - yeah I think it was open till end of March so just give Andy a bell Cheers CGS
arch Posted February 26, 2007 Posted February 26, 2007 Cool just need an STI 8 intercooler and undertray and then John is going to fit all the bits for me []
seafar99 Posted February 26, 2007 Posted February 26, 2007 That's the wagon fully de-catted and an uprated fuel pump fitted. Booked in at Andy's for this Friday 02/03/07 for it's Apexi Re-map. Excited? you bet.
JohnSt Posted February 27, 2007 Posted February 27, 2007 Cool just need an STI 8 intercooler and undertray and then John is going to fit all the bits for me [] At an hourly rate yet undiscussed []
seafar99 Posted March 3, 2007 Posted March 3, 2007 Not long back from Andy's, couldn't have hoped for a better session, nice cool, dry and quiet day traffic wise. Car performed and responded brilliantly. Mid-range pull through to 6k revs is really pleasing, car feels like it's got a whole new lease of life. Thanks again Andy . Craig.
RA Dunk Posted March 4, 2007 Posted March 4, 2007 Not long back from Andy's, couldn't have hoped for a better session, nice cool, dry and quiet day traffic wise. Car performed and responded brilliantly. Mid-range pull through to 6k revs is really pleasing, car feels like it's got a whole new lease of life. Thanks again Andy . Craig. is that you that had the black wagon m8?
seafar99 Posted March 4, 2007 Posted March 4, 2007 Ac!d - yip that was my black wagon, i take it that was you that was down picking up the gearbox?
seafar99 Posted March 4, 2007 Posted March 4, 2007 Marky.t.s - your avatar photo, is that you at the top of the ' wilderness brae' ?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now