Jump to content

Kent Scoobies Newsletter


Recommended Posts

Posted

Ok I seem to be the only one doing anything about this (with the exception of Deani_Age) so unless people start helping out with write ups, info , advice, tips etc im not gonna bother.

No point wasting my time trying to get it up and running if no-one gives a sh1t [:@]

Posted

i is not clever enough or know enough really!! Would love to help in any way I can so if there is anything I can do not too technical I will!!

But as for everyone else...

C'MON GIVE THE GUY A BREAK!!![Y]

Fantastic job by the way!![;)]

 

Posted

What regular features and special features do you want write ups for?

Ill do the Karting at Bayford this weekend if you want?

 

Do you want TOP-TIP suggestions etc..?

 

Posted

Q

How long do you need articles to be? Do you need pics? etc?

I could do my 2nd part of stereo install if that's a good article?  "Mr Wooding's Project Stereo Bodge"

[Y]

Trevor

 

Posted

Q

How long do you need articles to be? Do you need pics? etc?

I could do my 2nd part of stereo install if that's a good article?  "Mr Wooding's Project Stereo Bodge"

[Y]

Trevor

 

 

hey trev, after seeing your install last night i'd luv to see that write up[;)]

Posted

I need a gearbox drive shaft for a scooby if anyone has got one or knows someone who has one. We have had manufacturing problems at work with the non turbo scoobies and we have worked it out to be the drvie/centre plate. We found out from our testing department we dont have the drive shaft to test them on (thats probably why they dont work?!?!) Any one of the list of vehicles drive shafts will do.

Impreza 92 - 00 1.6 4wd (gc4)

Legacy 89 - 94 1.8 2 & 4wd (bc3/bf3)

Forester 97 - 2.0 16v 4wd

Legacy 91 - 94 2.0 4wd (bc5/bf5)

You can either contact me on here or email me at, kidneycrump@yahoo.co.uk

 

Cheers

 

Paul

Posted

Well it actually produces bass now- swapped RCA and speaker cables one side and power run down the other  (schoolboy error!!)

Upgraded the fronts from Infinity 5010cs reference to 6.5 infinity kappas (well 1 of them today- with dynamat this time)- no pics but will take same for the drivier's side swap-

Going to fit the 5010cs into the rear and mount the tweeter on the actual door- gasp- by cutting a hole in the fabric! if you're gonna bodge bodge it BIG i say however these will run off a cheap Kicker amp til i can afford another infinity one.

The actual boot install has stalled due to trying to figure out how to get it level in a subaru non-level boot!! (any ideas??) needs a bit more figuring out

 

[:D]

Trevor

 

 

 

 

 

Posted

Well it actually produces bass now- swapped RCA and speaker cables one side and power run down the other  (schoolboy error!!)

Upgraded the fronts from Infinity 5010cs reference to 6.5 infinity kappas (well 1 of them today- with dynamat this time)- no pics but will take same for the drivier's side swap-

Going to fit the 5010cs into the rear and mount the tweeter on the actual door- gasp- by cutting a hole in the fabric! if you're gonna bodge bodge it BIG i say however these will run off a cheap Kicker amp til i can afford another infinity one.

The actual boot install has stalled due to trying to figure out how to get it level in a subaru non-level boot!! (any ideas??) needs a bit more figuring out

 

[:D]

Trevor

 

 

 

 

 

CUT A HUGE HOLE IN THE BOOT FLOOR THAT WILL SORT IT[:D]

Posted

Well it actually produces bass now- swapped RCA and speaker cables one side and power run down the other  (schoolboy error!!)

Upgraded the fronts from Infinity 5010cs reference to 6.5 infinity kappas (well 1 of them today- with dynamat this time)- no pics but will take same for the drivier's side swap-

Going to fit the 5010cs into the rear and mount the tweeter on the actual door- gasp- by cutting a hole in the fabric! if you're gonna bodge bodge it BIG i say however these will run off a cheap Kicker amp til i can afford another infinity one.

The actual boot install has stalled due to trying to figure out how to get it level in a subaru non-level boot!! (any ideas??) needs a bit more figuring out

 

[:D]

Trevor

 

 

 

 

 

CUT A HUGE HOLE IN THE BOOT FLOOR THAT WILL SORT IT[;)]

 

I have a phone number of a good Joiner to cut the hole, or Loony could go round useing his chainsaw, lol [;)]

Posted

.......swapped RCA and speaker cables one side and power run down the other!...Upgraded the fronts from Infinity 5010cs reference to 6.5 infinity kappas (well 1 of them today- with dynamat this time).... Going to fit the 5010cs into the rear and mount the tweeter on the actual door...... will run off a cheap Kicker amp til i can afford another infinity one.

Trevor 

.....and for people like me [:$] , is there a subtitled version of what Trevor has just said lol lol....

Posted

.......swapped RCA and speaker cables one side and power run down the other!...Upgraded the fronts from Infinity 5010cs reference to 6.5 infinity kappas (well 1 of them today- with dynamat this time).... Going to fit the 5010cs into the rear and mount the tweeter on the actual door...... will run off a cheap Kicker amp til i can afford another infinity one.

Trevor 

.....and for people like me [:$] , is there a subtitled version of what Trevor has just said lol lol....

You must be getting old Barry as i understood every word [:D]

Posted

.......swapped RCA and speaker cables one side and power run down the other!...Upgraded the fronts from Infinity 5010cs reference to 6.5 infinity kappas (well 1 of them today- with dynamat this time).... Going to fit the 5010cs into the rear and mount the tweeter on the actual door...... will run off a cheap Kicker amp til i can afford another infinity one.

Trevor 

.....and for people like me [:$] , is there a subtitled version of what Trevor has just said lol lol....

 

For Barry=

Putting bigger (better quality) speakers in the front (the ones that were in the front now putting into the rear)run off 2 separate amps (for better quality sound)

Dynamat= soundproofing

speaker cables ive ran down one side of the car and the power cables down the other to avoid interference

Now thats better

 

Trevor

 

Posted

.......swapped RCA and speaker cables one side and power run down the other!...Upgraded the fronts from Infinity 5010cs reference to 6.5 infinity kappas (well 1 of them today- with dynamat this time).... Going to fit the 5010cs into the rear and mount the tweeter on the actual door...... will run off a cheap Kicker amp til i can afford another infinity one.

Trevor 

.....and for people like me [:$] , is there a subtitled version of what Trevor has just said lol lol....

You must be getting old Barry as i understood every word [:D]

I like the idea that I'm getting old rather than been there for years [:o]  Thanks Ian [Y]

Posted

Cheers guys?

T123VOR - dont really matter how many words as I can make it as large or small as needed, dont go on too much though lol (although seems like your stereo install has been written up now)

Pictures are good as long as they are not too big.

HOL - Yeah that would be good on the karting if you can and I will include top tips if people can send me their knowledge.

Loonytoon - Cheers good idea mate.

Shiralee - Thankyou, anything helps at the minute, any stories you have or experiences in your car, clean of course?

I really need to get these to me asap if im to get it together for this months meet.

Its not so much the suggestions I need but the actual write ups, so if you have any tips, ideas, funny stories, advice, please email me q_dog@btinternet.com

Or if anyone thinks im wasting my time, say now?????????? 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...