Jump to content

Rolling Road Day @ Power Engineering-- Sat 25th November


Recommended Posts

Dill H   -  est.280bhp   - 422bhp/377lbs/ft

Stuart Knight  -  est.350bhp  -  390bhp/347lbs/ft

Hol  -   est.390bhp  -  371bhp/362lbs/ft

Ade  -  est.320bhp  -  355bhp/323lbs/ft



Thanx once again for organising this. Car: MY04STi, Mods:
H&S Full decat Exhaust System, All the Zero Sports Cooling Aids:
including N1 panel filter, Air Intake Pipe, Cool Thermo, Radiator Fin,
Rad cap etc..., Walbro Fuel Pump 255L and a custom ECUTEK ReMap by Paul
@ Zen performance.
Well pleased.




Smiff99  -  est.330bhp  -  355bhp/312lbs/ft

Neilo  -  est.365bhp  -  349bhp/347lbs/ft

JohnD  -   no est.  -  341bhp/309lbs/ft

V5 Man (Evo VI)  -  est.290bhp  -  340bhp/289lbs/ft

Scogsy WRX  -   no est.  -  339bhp/334lbs/ft

XR
Wayne  -  est.280bhp  -  330bhp/312lbs/ft.......... Well i was very
pleased with the power figures i got today.Had a nice power curve and
the guys at PE said it was very well setup and was very happy with it -
I would of been happy with about 280-300bhp so 330bhp has left a bigger
grin...Thanks again to the team that set today up.

Paul WRX  -   est.309bhp  -  327bhp/321lbs/ft

Rob Cannon (Evo VI)  -  est.270bhp  -  326bhp/314lbs/ft

Loony Bin  -   est.290bhp  -  325bhp/305lbs/ft

Anger  -  est.320bhp  -  325bhp/285lbs/ft

Madras  -   est.330bhp  -  322bhp/356lbs/ft

Wayne  -  est.330bhp  -  322bhp/???lbs/ft

Rincage  -  est.300bhp  -  316bhp/312lbs/ft



STi 6 (the grey one). Very happy with my figures -
especially the torque. Car is standard apart from exhaust (sports cat
and magnex centre section and back box), filter, uprated fuel pump, and
Andy Forrest remap. Nice to know my little old classic has the same
performance figures as a brand new out the factory STi  :D


Le Barren  -  est.320bhp  -  312bhp/285lbs/ft

swtmerce  -   est.300bhp -   302bhp/256lbs/ft



Hi Pele. Yep, I'm the one with the oversize coat hanger in
my mouth :D I was so happy because I had only owned my car for 200
miles when she blew her big end bearings back in July. Since she was
rebuilt I've been paranoid about detonation amongst other things.
Anyway Iain said she was fuelling spot on, there wasn't even a tinkle
of det and she was running very sweet. Before she blew she was rolling
roaded at 304 bhp/250 lb/ft so I was very happy with today's 302 bhp.
More importantly, I've gained a whole load of torque low down in the
rev range. All credit to 22B Andy who rebuilt the motor. Thanks for
organising the day!


Scoots  -   est.270bhp  -  297bhp/296lbs/ft

Cheesy_555  -   est.275bhp  -  293bhp/263lbs/ft

T123VOR  -   est.280bhp  -  289bhp/306lbs/ft

Loony Toon  -   est.275bhp   - 285bhp/288lbs/ft


Well pleased with the car seeing as it only has a de-cat and
induction kit mated with a ppp ecu !!!! Made some good power so was
well surprised with it !!!  Cant wait to fit all the extra goodies
i have for it now[:P] roll on the next RR day !!!!



Liam Jameson  -  est.270bhp  -  280bhp/315lbs/ft

ScoobyPod  -   est.240bhp  -  279bhp/267lbs/ft

Scoobywhite74  -   est.275bhp  -  269bhp/275lbs/ft

Squadron Leader  -  est.250bhp  -  269bhp/250lbs/ft

Tyron  -  no est.  -  267bhp/268lbs/ft

Moo (Mazda RX 7)  -  est.260bhp  -  251bhp/204lbs/ft

Andy_C 28  -   est.260bhp  -  249bhp/253lbs/ft

Big Jay  -  est.240bhp  -  224bhp/270lbs/ft

Prodrive Tony  -   est.230bhp  -  219bhp/219lbs/ft

Gem (Corolla T-sport)  -  est.190bhp  -  201bhp/146lbs/ft

Claire Upton (Fiesta ST150)  -  est.150bhp  -  153bhp/147lbs/ft





Link to comment
  • Replies 203
  • Created
  • Last Reply

Top Posters In This Topic

Dill H   -  est.280bhp   - 422bhp/377lbs/ft

Stuart Knight  -  est.350bhp  -  390bhp/347lbs/ft

Hol  -   est.390bhp  -  371bhp/362lbs/ft

Ade  -  est.320bhp  -  355bhp/323lbs/ft

Thanx once again for organising this. Car: MY04STi, Mods: H&S Full decat Exhaust System, All the Zero Sports Cooling Aids: including N1 panel filter, Air Intake Pipe, Cool Thermo, Radiator Fin, Rad cap etc..., Walbro Fuel Pump 255L and a custom ECUTEK ReMap by Paul @ Zen performance. Well pleased.

Smiff99  -  est.330bhp  -  355bhp/312lbs/ft

Neilo  -  est.365bhp  -  349bhp/347lbs/ft

JohnD  -   no est.  -  341bhp/309lbs/ft

V5 Man (Evo VI)  -  est.290bhp  -  340bhp/289lbs/ft

Hmmm, got a whopping 50 bhp over my guesstimate and still left with my mouth turned down!![:(] Iain Ball says its running dangerously lean and hit fuel cut on every power run. Im booking in with Power engineering on monday, hopefully for 11/12/06, will update soon.

Scogsy WRX  -   no est.  -  339bhp/334lbs/ft

XR Wayne  -  est.280bhp  -  330bhp/312lbs/ft.......... Well i was very pleased with the power figures i got today.Had a nice power curve and the guys at PE said it was very well setup and was very happy with it - I would of been happy with about 280-300bhp so 330bhp has left a bigger grin...Thanks again to the team that set today up.

Paul WRX  -   est.309bhp  -  327bhp/321lbs/ft

Rob Cannon (Evo VI)  -  est.270bhp  -  326bhp/314lbs/ft

Loony Bin  -   est.290bhp  -  325bhp/305lbs/ft

Anger  -  est.320bhp  -  325bhp/285lbs/ft

Madras  -   est.330bhp  -  322bhp/356lbs/ft

Wayne  -  est.330bhp  -  322bhp/???lbs/ft

Rincage  -  est.300bhp  -  316bhp/312lbs/ft

STi 6 (the grey one). Very happy with my figures - especially the torque. Car is standard apart from exhaust (sports cat and magnex centre section and back box), filter, uprated fuel pump, and Andy Forrest remap. Nice to know my little old classic has the same performance figures as a brand new out the factory STi  :)

Le Barren  -  est.320bhp  -  312bhp/285lbs/ft

swtmerce  -   est.300bhp -   302bhp/256lbs/ft

Hi Pele. Yep, I'm the one with the oversize coat hanger in my mouth :) I was so happy because I had only owned my car for 200 miles when she blew her big end bearings back in July. Since she was rebuilt I've been paranoid about detonation amongst other things. Anyway Iain said she was fuelling spot on, there wasn't even a tinkle of det and she was running very sweet. Before she blew she was rolling roaded at 304 bhp/250 lb/ft so I was very happy with today's 302 bhp. More importantly, I've gained a whole load of torque low down in the rev range. All credit to 22B Andy who rebuilt the motor. Thanks for organising the day!

Scoots  -   est.270bhp  -  297bhp/296lbs/ft

Cheesy_555  -   est.275bhp  -  293bhp/263lbs/ft

T123VOR  -   est.280bhp  -  289bhp/306lbs/ft

Loony Toon  -   est.275bhp   - 285bhp/288lbs/ft

Well pleased with the car seeing as it only has a de-cat and induction kit mated with a ppp ecu !!!! Made some good power so was well surprised with it !!!  Cant wait to fit all the extra goodies i have for it now[:P] roll on the next RR day !!!!

Liam Jameson  -  est.270bhp  -  280bhp/315lbs/ft

ScoobyPod  -   est.240bhp  -  279bhp/267lbs/ft

Scoobywhite74  -   est.275bhp  -  269bhp/275lbs/ft

Squadron Leader  -  est.250bhp  -  269bhp/250lbs/ft

Tyron  -  no est.  -  267bhp/268lbs/ft

Moo (Mazda RX 7)  -  est.260bhp  -  251bhp/204lbs/ft

Andy_C 28  -   est.260bhp  -  249bhp/253lbs/ft

Big Jay  -  est.240bhp  -  224bhp/270lbs/ft

Prodrive Tony  -   est.230bhp  -  219bhp/219lbs/ft

Gem (Corolla T-sport)  -  est.190bhp  -  201bhp/146lbs/ft

Claire Upton (Fiesta ST150)  -  est.150bhp  -  153bhp/147lbs/ft

Link to comment

Dill H   -  est.280bhp   - 422bhp/377lbs/ft

Stuart Knight  -  est.350bhp  -  390bhp/347lbs/ft

Hol  -   est.390bhp  -  371bhp/362lbs/ft

Ade  -  est.320bhp  -  355bhp/323lbs/ft

Thanx once again for organising this. Car: MY04STi, Mods: H&S Full decat Exhaust System, All the Zero Sports Cooling Aids: including N1 panel filter, Air Intake Pipe, Cool Thermo, Radiator Fin, Rad cap etc..., Walbro Fuel Pump 255L and a custom ECUTEK ReMap by Paul @ Zen performance. Well pleased.

Smiff99  -  est.330bhp  -  355bhp/312lbs/ft

Neilo  -  est.365bhp  -  349bhp/347lbs/ft

JohnD  -   no est.  -  341bhp/309lbs/ft

V5 Man (Evo VI)  -  est.290bhp  -  340bhp/289lbs/ft

Hmmm, got a whopping 50 bhp over my guesstimate and still left with my mouth turned down!![:(] Iain Ball says its running dangerously lean and hit fuel cut on every power run. Im booking in with Power engineering on monday, hopefully for 11/12/06, will update soon.

Scogsy WRX  -   no est.  -  339bhp/334lbs/ft

XR Wayne  -  est.280bhp  -  330bhp/312lbs/ft.......... Well i was very pleased with the power figures i got today.Had a nice power curve and the guys at PE said it was very well setup and was very happy with it - I would of been happy with about 280-300bhp so 330bhp has left a bigger grin...Thanks again to the team that set today up.

Paul WRX  -   est.309bhp  -  327bhp/321lbs/ft

Rob Cannon (Evo VI)  -  est.270bhp  -  326bhp/314lbs/ft

Loony Bin  -   est.290bhp  -  325bhp/305lbs/ft

Anger  -  est.320bhp  -  325bhp/285lbs/ft

Madras  -   est.330bhp  -  322bhp/356lbs/ft

Wayne  -  est.330bhp  -  322bhp/???lbs/ft

Rincage  -  est.300bhp  -  316bhp/312lbs/ft

STi 6 (the grey one). Very happy with my figures - especially the torque. Car is standard apart from exhaust (sports cat and magnex centre section and back box), filter, uprated fuel pump, and Andy Forrest remap. Nice to know my little old classic has the same performance figures as a brand new out the factory STi  :)

Not a very good vid - but this was mine

Le Barren  -  est.320bhp  -  312bhp/285lbs/ft

swtmerce  -   est.300bhp -   302bhp/256lbs/ft

Hi Pele. Yep, I'm the one with the oversize coat hanger in my mouth :) I was so happy because I had only owned my car for 200 miles when she blew her big end bearings back in July. Since she was rebuilt I've been paranoid about detonation amongst other things. Anyway Iain said she was fuelling spot on, there wasn't even a tinkle of det and she was running very sweet. Before she blew she was rolling roaded at 304 bhp/250 lb/ft so I was very happy with today's 302 bhp. More importantly, I've gained a whole load of torque low down in the rev range. All credit to 22B Andy who rebuilt the motor. Thanks for organising the day!

Scoots  -   est.270bhp  -  297bhp/296lbs/ft

Cheesy_555  -   est.275bhp  -  293bhp/263lbs/ft

T123VOR  -   est.280bhp  -  289bhp/306lbs/ft

Loony Toon  -   est.275bhp   - 285bhp/288lbs/ft

Well pleased with the car seeing as it only has a de-cat and induction kit mated with a ppp ecu !!!! Made some good power so was well surprised with it !!!  Cant wait to fit all the extra goodies i have for it now[:P] roll on the next RR day !!!!

Liam Jameson  -  est.270bhp  -  280bhp/315lbs/ft

ScoobyPod  -   est.240bhp  -  279bhp/267lbs/ft

Scoobywhite74  -   est.275bhp  -  269bhp/275lbs/ft

Squadron Leader  -  est.250bhp  -  269bhp/250lbs/ft

Tyron  -  no est.  -  267bhp/268lbs/ft

Moo (Mazda RX 7)  -  est.260bhp  -  251bhp/204lbs/ft

Andy_C 28  -   est.260bhp  -  249bhp/253lbs/ft

Big Jay  -  est.240bhp  -  224bhp/270lbs/ft

Prodrive Tony  -   est.230bhp  -  219bhp/219lbs/ft

Gem (Corolla T-sport)  -  est.190bhp  -  201bhp/146lbs/ft

Claire Upton (Fiesta ST150)  -  est.150bhp  -  153bhp/147lbs/ft

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...