Your thoughts please !

[imprezyou]

I am thinking about haveing a set of tein coil overs with an edfc unit fitted, do you think there is much use for the edfc unit or what other coil over sets do you recommend? i am running on  koni dampers and eibach springs at the mo and find after switching to 18 `s  its to god dame low, cornering is a mare and i am getting lots of rubbing on the rear. Your comments and suggestions please.

[granby]

First thoughts are you have wheels with the wrong offset or the wrong size tyres

[Wee Jock]

Changing your suspension wont stop your tyres from rubbing unless you turn it into a monster Scoob! As the "Rain Man [li] " says sounds like your combination is too big for your arches now!

[imprezyou]

The suspension was dropped by 45mm before these wheels went on , this set up does not allow ride height adjustmet and i only need a few extra mill , so i am hopeing that changeing to a ride height adjustable will resolve the problem, i do have the right tyre and correct offset as its been checked by my tyre shop, it only just touches the outta part of the arch when really cornering really hard.

[Wee Jock]

Sounded like you had a good setup b4! Would it not be cheaper just to get new springs 5mm larger than the ones you have now?

[tony_cousins]

Go the full hog and get the Tein [Y]

You can go as low as you want and when a speed bump comes up you just raise it a little and carry on []

Seen the unit in action and it really is worth every penny as you can

have four programmed settings and still be able to adjut for individual

requirements too []

Tony[H]

[deani_age]

Don't get HKS Hyper D's, well not if you value your teeth.

[tony_cousins]

Lol he is not as old as you []

[deani_age]

Not many Kent Scooby members are. Although I'm clearly not the oldest. And yes I do still have all my own teeth, well most of them anyway.

Don't think I'll be saying this for much longer if I keep driving the RA on the road.

[tony_cousins]

Lol  dentures on the way then huh Gramps []