gus the bus Posted February 12, 2006 Posted February 12, 2006 Folks I've got the chance of a Prodrive sport-cat which was removed from an sti (at 1 week old!) just wondering if this will indeed fit the WRX300? As the car is new(ish) and i dont't want to go aftermarket for now [] I've been informed that fitting this (if it does fit?) wont affect my warranty and wont require re-map etc... advice please! Cheers Gus
~ ~ Cal ~~ Posted February 12, 2006 Posted February 12, 2006 It will likely fit but not be a very tight fit unless it is *******ised slightly..........I tired fitting a PPP high flow cat to my WRX 2002 and the guys at AWD reckoned it didn't fit great. The brackets are different too I think. I just bought one of these which shpould fit nicely. It's fitted as part of the TSL 333 package so might not be as good as a full decat but for the sake of a few ponies I didnt have to d1ck around come MOT time. I would avoid fitting it if I were you. Quite a lot of labour to pay if it fits poorly ? Cal p.s here is one on Fleebay
gus the bus Posted February 12, 2006 Author Posted February 12, 2006 Cheers Cal, I'd been looking at the TSL one on fleebay and like you don't want the MOT/ remap issues of full decat. The STI one was offered to me for £110 so thats why I was asking. Sounds like I'd be better holding fire and spending the £395 if its a better fit/bet. I take it you dont need a remap with a sport/ highflow cat. Gus
~ ~ Cal ~~ Posted February 12, 2006 Posted February 12, 2006 You could put in the highflow cat and decat the rear centre without a remap. I have one for sale ( centre & link section) as it turns out - see below You could go full decat without a remap but I'd advise against it....... Cheers Cal
oz *sti* Posted February 12, 2006 Posted February 12, 2006 what about the new ninja downpipe with a 100 cell fast flow cat from scoobyworld they have them for £299. Just a thought.
STi_Bandit Posted February 12, 2006 Posted February 12, 2006 The Ninja Downpipe they have at scoobyworld is only available for the classic at the moment, hope they make one for the new age soon[]
drb5 Posted February 12, 2006 Posted February 12, 2006 I'm selling a universal high-flow sportscat. It's ideally for a 3 inch bore exhaust, but as it has to be fitted by sectioning the pipe in, i dare say you could get reducers added to sort that out.
fai17 Posted February 13, 2006 Posted February 13, 2006 Yous should get one of these babies.Meercat snakehead decat down pipe at £250 ish.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now