Project "stealthy" 400 Or 500bhp (or Something In Between)

[col_2]

Did another mod to the car the other day although i didn't intend to lol, managed to rip off one of my mudflaps when parking at work so time for a change, one off all off so the car is now mudflapless

nothing wrong with flapless, too much flap spoils it

[BLUE V LTD]

Done a couple of little mods over the last few weeks

1. gone back to the original WRX bonnet scoop (thanks mikkers) as the STi one is not needed now with the FMIC

2. used the original o/s fog light surround for a cold air feed for the APS induction kit, not sure what it's gonna be like when it rains though, might also do the n/s one as well as i think it looks a bit one sided the way it is at the moment

I think you should remove the other fog light cover looks like one of them has fallen out and missing a cover and a bit one sided. But what do i know still looking good tho like the smaller scoop better.

[granby]

Fitted a couple of switches today, can you guess what they will be used for (not at the moment though)

ps...Dunks can't post as he already knows the answer

[Scooby Hoo?]

Fitted a couple of switches today, can you guess what they will be used for (not at the moment though)

ps...Dunks can't post as he already knows the answer

Sounds like your Launching your own Anti-Lag Club

[granby]

Sounds like your Launching your own Anti-Lag Club

Very good Hugh

[fudge]

Green Switch = Nitromethane

Red Switch = Parachute deployment

??

[Scooby Hoo?]

Fitted a couple of switches today, can you guess what they will be used for (not at the moment though)

ps...Dunks can't post as he already knows the answer

Green switch is Anti wheel clamper.

Red switch Anti parking warden.

[col_2]

Green switch is Anti wheel clamper.

Red switch Anti parking warden.

green switch turns ice cream maker on.

red switch is for the tune to let everyone know your in the street

[prodrive tony]

Fitted a couple of switches today, can you guess what they will be used for (not at the moment though)

ps...Dunks can't post as he already knows the answer

Ejector seat and rear guns??

[granby]

Ejector seat and rear guns??

The ejector seat is just for you

[mikkers]

Anti lag (obvioulsly) and launch control? But should be lunch contol in your case.

[granby]

Anti lag (obvioulsly) and launch control? But should be lunch contol in your case.

Edited August 19, 2009 by Granby

[eureka]

car is looking cool mate

[granby]

car is looking cool mate

Cheers Steve, should go a bit better next week

[psigeek]

Granby, can I ask where you got the switches? I have one in mine exactly like those that controls the rear fog. I could use a couple more and having the same ones would be perfect.

[granby]

Granby, can I ask where you got the switches? I have one in mine exactly like those that controls the rear fog. I could use a couple more and having the same ones would be perfect.

Here you go http://www.vehicle-wiring-products.eu/VWP-...ches/rocker.php

[eureka]

Cheers Steve, should go a bit better next week

may do 321

it will i promise

[eureka]

when mine is back in 2012 we can have a little run out

[granby]

when mine is back in 2012 we can have a little run out

So they are gonna rush it through then

[cossie_eater]

where did you get the switches from Granby seem to be the perfect size for the job.

[granby]

where did you get the switches from Granby seem to be the perfect size for the job.

4 posts up is your answer

[granby]

Well had the MD321S fitted yesterday and a Simtek with anti lag & launch control fitted and mapped by JGM today, had a little problem with a sensor but a couple of phone calls later (cheers Eureka) and that was sorted

Managed to get 432bhp & 380ft lbs at 1.5 bar, they did try 1.7 bar but something was holding the car back which wouldn't let it release any more power, after talking to Simon & Charlie it seems the the exhaust (still a 2.5" system) could be the problem so it looks like i'm after a full 3" system now

Haven't really had a chance to test it yet but the car does seem a lot smoother, did boot it a couple of times and if i'm honest it didn't seem that much faster but i was in quite heavy traffic so will give it another try when nothing is around

Edited August 26, 2009 by Granby

[Moley_WRX]

Well had the MD321S fitted yesterday and a Simtek with anti lag & launch control fitted and mapped by JGM today, had a little problem with a sensor but a couple of phone calls later (cheers Eureka) and that was sorted

Managed to get 432bhp & 380ft lbs at 1.5 bar, they did try 1.7 bar but something was holding the car back which wouldn't let it release any more power, after talking to Simon & Charlie it seems the the exhaust (still a 2.5" system) could be the problem so it looks like i'm after a full 3" system now

How was the drive home? Go via any tunnels? ;-)

Good to meet you

[granby]

How was the drive home? Go via any tunnels? ;-)

Good to meet you

Too heavy traffic to do anything , no tunnels but it didn't stop me flicking the switch

Nice finally to put a face to a name (& voice)

[eureka]

you not met gary b4 gramps sorry would have introduced you