Jump to content

JR Scrappydoo

Forum-Member
  • Posts

    7
  • Joined

  • Last visited

  • Days Won

    1

JR Scrappydoo last won the day on March 18

JR Scrappydoo had the most liked content!

Reputation

1 Neutral

About JR Scrappydoo

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Thanks for the reply, that makes it easier. Appreciate the help ????
  2. Hi all I've got a TY754VN5AA gearbox in my wrx and I'm looking at swapping the box for another one as got issues with the box and need to do the seal & covers. I'm after another box that I can bolt on without changing any shafts or parts. Does anyone know if the TY754VN4AA or TY754VN6AA boxes will be a direct swap, and if there's any difference between them Thanks Jonny
  3. Latest update. I've got the original ground going through the loom and done a ground wire from the chassis to the cage where the original Subaru ground wire went. Tried it with nothing plugged in apart from the main loom and it's exactly the same no matter what you plug or unplug. Checked the loom and all wires correct. If I manage to get it working, drive somewhere and come back to my car shortly after it will work straight away no issues until say the next morning or later that day. But yet the alternators working fine and my battery's got plenty of charge in it. Just don't make sense to me
  4. I tried it from 9v up to 13v to test the range. And I simulated turning car off and back on and the stereo worked perfectly. Yh I fully charged the car at weekend and tried it with the charger connected and was the same. I might have to check alternator but I'm totally confused with it all. The powers correct through the loom but yet plug the stereo in and fires up then reboots or freezes and does that loop for a while
  5. Thanks for your help Subaru loom to iso, all wires are correct. Both fuses are fine, check both power and accessory and both reading 12v +. The blue/white plug is connected fine & the parking brake wire (yellow/black) is earthed to chassis of cage
  6. Yh the old unit worked fine. It's the pioneer avh-x3700dab I've fitted. Yh I got a new scoob iso loom and pioneer loom both connected and getting correct voltage/output from the power & memory through the loom itself. But yet when the stereo was on a power supply it worked no issue so it can't be the unit itself. So I unplugged the constant from the loom and when to the fusebox to see if that would help but it doesnt
  7. Hi all After some advice on my stereo install. Had the scoob about 6 months now came with a aftermarket basic double din unit and I've just replaced that with a Pioneer avh unit. Installed it using the correct looms and grounded it to the chassis aswell as attached to the Subaru ground connection. The problem I have is the stereo works intermittently, when it does work it will freeze and do a reboot loop about 5 odd times before it works no problem untill I switch engine off and leave it a while and then it's back to square one. At the weekend I made a piggyback connection from a constant on the fuse box to see if that would help but it's the same. I've tried it out of the car on a power supply and it works perfectly all I can think of trying is running a constant from the battery direct to see if that does anything. If there's anyone out there with any help its appreciated. I've seen plenty of scoobs with different sound systems and they don't seem to have any issue Thanks
×
×
  • Create New...