Hanarnhem

Subaru wrx sti 07 model. How do i know when it's in his testing mode for downloading the rom. thanks

wel yes hydrogen has it's pros and cons The pros are that if it's used right at the correct lambda it's only produces water in the muffler (el gore or whats his name would be proud) and it can also run at a very poor mixture of λ ≥ 4. Even then in provides a stable cumbustion with high efficency. The H2 has a lot of cons but i only say wich problems we had. The cons that we also had to deal with were the backfires the car had. We still not sure why but we have some ideas.(like hotspots) Furthermore the hydrogen that we use is in compressed gas form. We already have an gasstation in Netherlands that provides us with hydrogen every time we have a need for it. But the oils deposits are draining indeed and they draining fast. So wich fuel will power future cars.

Fabrik out the Sti has about 330 hp on petrol. We haven't really had a chance to do a power run on Hydrogen because our Ecu maps are all mest up. We are trying to find the best combination on the best preformence and stable engine. At this point we estimate the Impreza has a poor 70 hp on hydrogen but if the calculations are correct it should produce about 200hp on h2

Hey guy's I know that this topic is 100 years old and already has grey hair and a beard but still, i searched all over the internet to find why it won't work and tried ( i thinkg almost everything) but i just won't download the rom from our H2 (hydrogen) Subaru 07 impreza Wrx Sti I first tried to download it with the ecuexplorer but that was nog luck. The green blocks were connected en the fan made it's noise, the port1 (rs232) connecion was there but it just dint download the rom. Second i tried it with the ecuflash. The Tactrix cable and the program were purchased the ecu flash made its connection with but it din't read. I tried all cars that were listed but that didn't help The error that it made was: 14:25:26.296] denso02_bootloader_cmd_start [14:25:27.531] denso02_bootloader_cmd_start [14:25:27.953] kernel get version [14:25:28.281] interface close [14:25:28.296] interface close Ignition off ignition on etc.... I also have read that you may have to jump connection block under the dash either by purchasing a flash block connector or simply using two wires to short the relevant pins. But i serched for that block and i don't think a have it Has anybody else had maybe the same problem, if so how did you get it to work. It would help allot if somebody knew what the problem was. The car is impreza wrx sti 07 with 2 ecu, one original and one from motec.(not that it matters) The rom i'm trying to get is from the orriginal ecu ofcourse. Got any tips??

Just wanna say hi to every one. We are students from Holland with a project car Subaru Wrx Sti 07 that with a push of a button runs on Hydrogen with a secondary Ecu from Motec