notsosmall

Yeah thats the ones, for holding the pads. £6.66 each!!!! Maybe a 4" nail with a hole drilled in the end would work. lol. Stainless efforts would be good from somewhere, no rust to contend with. I might try a few factors tomorrow, like Dingbro etc.

Thanks

There not cheap

Let us know how you get on at the motor factors ect, I could do with renewing mine after having trouble getting them out and bending the ends last time

Did no one else notice the user's name that posted it?

MAKESSTUFFUP !?

Still got to be worth someone with buggered shocks trying out though

I seen this car in the flesh at Alford yesterday and it looked great

good work

I think these look good

http://www.revolution247.com/zero-sports-c...ru-77853-0.html

The suspension will be different

I bought bugeye springs thinking they would fit a blobeye, the fronts fitted but the rear is different

Nice wheels though I just got a set of the ones you just sold back powder coated gloss black

Very good result

Car look as it should be MINT, hope Bobby's going to read the correct washing post and keep it that way

I would so love that spoiler!!!

Looks good mate

Great improvement

The Werkstat Acrylic kit is really good stuff,

The Jett is really easy and a pleasure to use, Layer it up and it gets better and better and easier and easier each coat you apply

Here's a pic of mine wearing 7 layers applied an hour apart

I know AWD in perth can do a CEL light fix by soldering in a small add on that reduces the voltage some how and prevents the CEL showing for this fault

Would be worth contacting them to discuss very friendly and helpful people, im sure it wasn't expensive either

Here's there contact details:

AWD Motorsport Engineering

Unit 5, Inveralmond Way,

Inveralmond Ind. Estate,

Perth, PH1 3UQ,

Telephone: 01738 633336

Email:sales@awdmotorsport.co.uk

Yeah ok so it can shift and would be fun on the track

BUT its still a s****ron AX

Not my thing

But they do look good

Hello and welcome

Nice looking Scooby, really like the black wheels

1. Bobby C - GB 270 - 340 BHP

2. Mag C - Type RA ver 2 - 280 BHP

3. kennyuk300-UK300 - 265 BHP

4. imy - ver 2 STi Type RA V-Ltd - estimated 310bhp

5.wrx kenny wrx approx 245bhp

6. Scotsman - Bugeye WRX Wagon - 306bhp

7. Notsosmall- Blobeye WRX approx 245bhp

well i just found the answer out the hard way

Its....

Fronts yes :madnoel:

Rears NO

so went out at tea time started with the front done in next to no time, then onto the rear had a job getting the strut bolts off only to strip it down and find that the spring does not fit

Mine MY03 Blobeye narrows at the top the replacement from bugeye doesn't and is the same width all the way up

so had to rebuilt standard rears not too happy at the moment, will see how it looks i the morning :roll: and strip the fronts again :cry:

unless anyone has standard Bugeye shocks lying about i can try?

Pretty sure you cant get the PF pads for the newage WRX 4 and 2 pots

Ah ok cheers

List updated then

1. Performance Friction Z-Rated pads front Brembo - Arch

2. Westtra - Front DS2500 for Hawkeye STi

3. ScoUK - (DS2500 Front pads for standard newage WRX01 4 Pots)

4. STI Pretender (DS2500 Front and Rear pads newage STI06 Brembos)

5. Kaylz555 (Red stuff)

6. Scoobnoob (PF Z-Rated pads, 326mm PF front discs, to fit a brembo conversion on 96 classic sti ra)

7. s25yme - (DS2500 Front pads for standard newage WRX06 plus front discs.)

1. Performance Friction Z-Rated pads front Brembo - Arch

2. Westtra - Front DS2500 for Hawkeye STi

3. ScoUK - (DS2500 Front pads for standard newage WRX01 4 Pots)

4. STI Pretender (DS2500 Front and Rear pads newage STI06 Brembos)

5. Kaylz555 (Red stuff)

6. Scoobnoob (PF Z-Rated pads, 326mm PF front discs, to fit a brembo conversion on 96 classic sti ra)

7. s25yme - (DS2500 Front pads for standard newage WRX06 plus front discs.)

8. Performance Friction Z rated pads all round standard newage MY03 WRX

1. Kinghorn - STI7 - EcuTek Tweek

2. stuarted - P1 - Apexi tweek

3. Rice Rocket - WRX - Tweek

4. sti_steve - 03 STi PPP - Ecutek custom remap including licence

5. Cullenmin - Type R - Apexi tweek

6. ~ ~ Cal ~ ~ - sti'd WRX - Apexi tweek

7. Sake-Bito - 2007 STI - Ecutek custom remap including licence

8. Ciaranrb5 - RB5 - Ecutek tweek

9. Steveo_8 - P1 - Supply, fit and map Simtek(possible anti lag)

10. Dan Terzo - P1 - Ecutek custom remap including licence

11. LewisScoob - 99 UK Turbo - Fitting decat and Nur Spec R, not sure what I need?!

12. Gordyq - Type R - Apexi Tweek

13 Playsatan - simtek tweak

14 Col 666 - STI 9 - ECUTEK custom remap including licence.

15 WUZ MY06 STi (DBW) EcuTeK custom remap and licence

16 W88CHY MY02 STI PPP EcuTeK Custom Remap and Licence

17. HI_JAC - ECU change to simtek, licence paid with anti lag and launch control.

18. ton246- My own Apexi fitted & mapped

19. Rheid - 2007 STi - Ecutek custom remap and license

20. Notsosmall- MY03 WRX Ecutek custom remap and license

Lets hope we can get some more off now there's 20!?

Looks really good mate, personally not too sure on the white alloys cant really decide if i like them or not

I have the same BOV, turbo smart supersonic

No one knows then ??????????????

As per title, will they fit?

I have the chance of a set of Eibach Pro-kit lowering springs just want to make sure they will fit

Cheers

hi m8 you also need to make spacers to take up the distance difference between the bar and arm, if you dont the drop link is overstretched,and will damage the bushes

chers geo

GP Motorsport :

yes true m8 I just used a few small washers to replace the spacer, seems to have worked well and they look identical to klc32's when fitted

You can modify the Klc30's to fit the same as klc32's, all you need to do in bore out the 8mm hole to 10mm that same as the other end and replace the bolts, washers ect

I have just done a set to fit my car

I had to buy the bolts, nuts and washers in bulk to get the correct ones i wanted so have extras

Yeah sounds like droplinks, i just changed mine because they were knocking

seems strange that you only noticed it after the springs were fitted though!?!

I was there today too

But my pics are cr4p and not worth showing