rig-pig

BTW - Need to thank you Chris... after you drove past me and the mrs last night, she commented that the hawkeye doesn't sound as good as the classic, I explained that it was cos it has a crappy powerflow system instead of an proper aftermarket one - then she said, "oh well, you can just buy a new one" Sweet !!

nice one, exhaust next then ??

its a pain but if you have a few bob, http://www.cjautos.site90.net/hyramp.html

i have 2 set's you can borrow 1 for a while if you want, give you a chance to OCD clean at the back of the wheels ect, also have drive on ramps if you want a shot as you will get on just now before the car is lowered ??

stoptech are very good brakes, all newage scoobs suffer from crap rear shocks and are prone to knocking made worse with lowered springs, i have had a set of springs on mine for just under a year and have had to replace one of the shocks due to knocking

lol take the light unit out it takes 5 min and the job is a lot easier

welcome to the fold m8, plenty of members from the lanarkshire area to let you know about garages, give badbaz a P.M im sure he works/runs a garage and he knows his scoobs inside out

if the cars not been mapped then you will prob be about 240bhp ??? for over 280 you need a bigger turbo and injectors over the standard wrx stuff, a remap should see you about 270-280 bhp with the mods you have just now

thanks got the sky+ set to rec it

these disc's and the kevlar pads m8

http://www.superhids.co.uk/brakes/brakes-subaru-impreza/subaru-impreza-uprated-grooved-discs-and-pads/front-discs-and-pads-1/294mm-subaru-impreza-grooved-discs.html

sounds like a slight warp, have a look here i have had a set on the car for over a year with no probs and better than standard

http://www.superhids.co.uk/brakes/brakes-subaru-impreza/subaru-impreza-uprated-grooved-discs-and-pads/front-discs-and-pads-1.html

very nice m8 like both the cars

wow thats nice and loud but in sure it's only 3000rpm they are meant to test it at ?? could be wrong tho

blob or hawk wrx but what one

lol its a Z4 AL has

nice

best bet is get the bolt welded on, mine is on the de-cat up pipe, your H&S i got will be fitted once a get a set of headers and a bolt fitted and welded on

blob a bit less cash on the outlay, so cash for mods after you get it and less road tax

spring of what year ??? lol glad you have plans at last for all the parts, will be good to see it all up and running

glad you got close to the asking price, it was a tight fit with the pram in my scoob but it was ok in the wifes wagon and its easier to fit a walbro pump and do the suspension in the wagon

you will have to repair or buy good sills from a brakers as im sure you cant buy new replacement sills for them

a newage STi but you will need one from a pre 2005 to save changing the hubs, you will need gearbox, clutch, propshaft, diff and drive shafts from a newage sti

yes just hope i can make this one

and feed

chris try to P,M you but your in box must be full as it wont let me send mail, could be interested in the STi wheels i will text you later

what time you fin work tomorrow ?? drop past the house and i will have a look for you, bring grass feed lol

could be a split or loose hose m8 when is it going in ???