Auldy

cheers guys as you all say just glad still got the motor would have been even more gutted to have found it burnt out or on police camera action with some t**t behind the wheel. did see that news article as one of my mates pointed it out - made me wonder if it could have been the same bunch. like the camera and pc idea though goin to look into that bit more as there is no street cctv etc round my way. cheers stuart

Woke up this morning to a call from Lothian and Borders police telling me some dirty low life tried to steal my car while i was staying at the girlfriends parents last night. Anyway got up and back to the flat to find the wiring and alarm box all ripped out from under the dash. on quick glance wiring looks in one peace and car starts so no faults with immobiliser but they managed to make off with the Apexi S-AFC II which was mounted on the dash and have left a few dents in the drivers door which i think is from them kneeling against it while prising the window back so they could use something to open the car. later found out my beloved scoob was not the only one last night to get targeted as another not far from me had its window smashed and contents removed Im so mad, just wished i had been at the flat to catch the dirty c***s cant believe the inconsiderate b*****s probably sittin smug after selling everything of for his next hit of crack!!!

Hi guys Little more help required - got car back on road but turbo has now packed in, found out problem was oil feed got blocked and not supplying turbo with oil so recon bearings have gone as its bit noisey. Any one know where i could get this recond at decent price or anyone thats got a second hand one in good nick for sale. dont really want to have to go down route of forking out on new turbo. Turbo is a VF28 roller bearing. fitted to a 99 v5 wrx sti. cheers stuart

found that the bearing seal on engine was leaking - got new ordered plate you had mention previous was fine but took it off and re-sealed it while I could get at it just so i know its been done. had originally though it was gearbox because oil was bit low and flywheel n clutch werent sprayed in oil plus thought that hole mentioned above wasnt ment to be there. learn sumit new everyday cheers again Stuart

Thanks for that mate, kinda thought it was to perfectly shaped to be cracked. havent taken clutch off yet so check that tomo.

Hi guys experiencing a little gearbox leak, so took the gearbox out earlier this evening and noticed a small triangle shaped hole underneath the shaft. just wondering if this is ment to be here? if not this will be most prob the cause of the problem. Just never noticed this before on the gearbox and looks too perfect to be a crack in the casing. any help appreciated. pic below for reference.

As per RIO180 and used forge motorsport

nope cant hear it, only thing i can hear is boost soleniod clicking when turning on ignition.

Hi guys looking for some help if possible please. Cars turning over and getting spark etc, but found out that its not pumpin fuel through to the engine. Just wondering if theres a fuel relay/fuse that i can check? is it possible that the pump has just packed in or there some other reason/common fault that i may overlook? if someone could point me in the direction of fuel relay/fuse so i can check this first that be great. Scoobs a 99 V5 wrx sti - import Thanks Stuart

Hi guys - help if possible please coming off the wiring harness from under the inlet manifold got 3wires coloured black with blue stripes with round terminal on the end where does this go? is it an earth or does it go to a positive connection? thanks stuart

found out that these are referred to as oil squirters anyone got any spare? for sale? or know of contact/source that i can get these from? cheers stuart

Hi Guys Some of you may have seen the post I stuck up couple weeks ago regarding my big end bearings packing in. on closer look we found out that it was in fact big ends no1 and 4 that had basically disintegrated. further inspection found that car was running closed deck block with forged pistons, conrods and crank. which i was surprised about anyways crank and conrods aswell as bearings wer buggerd and iv bought all replacement parts needed to put back on the road BUT...... had the block away for to be skimmed and honed out only for them to break one of the nozzles that spray piston with oil, anyone know where i can purchase or source these as tried nobles and checked a few sites online with no luck so far. any help appreciated Cheers Stuart

couldnt tell you mate sorry - not got a boost gauge

hows it goin Frank Yeh sorry ment to mention car had a remap when exhaust was fitted but this was by previous owner - figures below are just with exhaust turbo is a VF28 ball bearing turbo, which i believe is standard for my car - maybe wrong tho, i will need to sort the old man out he must of been smoking crack on the day you spoke to him Cheers Stuart

yep thats the one. filters standard yeh - no engine mods apart from exhaust. cheers for the help guys, much appreciated

#4 packed in, cool i will price a new crank also. never been mapped for uk fuel always run on vpower and motul oil. cars pretty much standard apart from full magnex exhaust system. never had any problems previously apart from a MAF sensor packing in just after buying the motor 3-4yr ago.

not me personally but my old mans a mechanic so will have him at hand when doing the repair stripped engine down today and as expected one of the big end bearings has packed in. going to replace oil pump, get the crank re-ground, new rings and filter as well as a new set of bearings. should i look out for anything else that might need replacing or should that be ok. anyone got any recommendations for cheap parts, been surfing the web for a bit but might have overlooked good suppliers? cheers

Any one replaced big end bearings before? mines have just packed in so looking for best prices and dealers to get parts from. also whats involved in replacing these - anyone got any tips, tricks or anything that i should look out for when doing this?? Cheers

Circus Casino @ fountainpark - edinburgh has £33 no rebuy tourny on a sat and 10quid rebuy tourny on fri night if i remember correctly. been a couple times was good banter/ plenty players and good pot. never reached the final table tho to see any of it

Cant wait for this - only downside is no damage to vehicles

I use Full Tilt mostly as i find it runs alot quicker on my laptop than others plus just as good. I found PKR to take up lot of memory and slow down comp running speed but apart from that would play on pkr all the time if I had a PC or Laptop that could cope with the graphics. Still prefer live games at casino or with mates in the house to be honest as get better banter

Like the bonnet, car looks smooth without the vents - defo summit id do if fitting a front mount.

maybe a loose spark plug?? had one loose as forgot to tighten after service. made a hell of a racket

cheers for letting me have 1st chance mate, but you can have that one as my dad managed to get hold of one for me over the wknd