T123VOR Posted August 18, 2006 Posted August 18, 2006 Can I as a'driveway mechanic' fit/change my downpipe myself? I have a jack, axlestands only. Obviously removing the cats (for off road use only obviously!) is going to light up my dashboard- how can i get round that? Can i get away with doing this without a remap for 2 or so months? Is the up-pipe worth changing? How much noisier would 3" decat be compared to my 2.5"? Ta in advance Trevor
tony_cousins Posted August 18, 2006 Posted August 18, 2006 Depends on your skill with a spanner !!!! When mine was done the bolts had seized so need air tools to remove it but as long as there are no troubles you could just about do it [Y] Up pipe is defo worth changing but you will need a remmap after because it changes the way the turbo spools up and you need to adjust the fuelling to compensate for this. Will also mean your turbo will spool up that little bit quicker too Not too much louder either []
raymond_duvall Posted August 18, 2006 Posted August 18, 2006 How much noisier would 3" decat be compared to my 2.5"? Ta in advance Trevor i have decat and downpipe and up pipe on mine.mines very loud ask the neighbours as i work nights oops[]
granby Posted August 18, 2006 Posted August 18, 2006 Definitely change the up-pipe as it has a pre cat in it and if that starts to break up for any reason it goes straight into the turbo [], it's also worth wrapping the up-pipe & down-pipe and the headers if possible. You can change them yourself but the up-pipe is a pig as you have to jack up the engine a little, as Tony said down-pipe can be done but 9 times out of 10 one or more of the studs will be stuck or difficult to remove (Xtreme had a problem with a stud on mine even though it was only 6 months old []) Don't think a 3" decat would be a lot more noisier than a 2.5" [:^)] De-catting will bring the CEL light on but you can get a CEL fix kit for that (Xtreme do them) Ian
T123VOR Posted August 18, 2006 Author Posted August 18, 2006 Cheers All I'll speak you all later. I had some KS stickers for my car to show you too [:^)] Trevor
leon Posted August 18, 2006 Posted August 18, 2006 i did my downpipe by myself and i recommend you either get a person to help you or get a proper mechanic to do it because its is a rite pain in the arse! took me 6 hours to change the downpipe, but it was in the wet in 3 inchs of rain water and it was dark and i was by myself! if i had more money i would get somone else to do it! good luck mate! its worth it in the end!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now