Gumball Posted August 21, 2005 Posted August 21, 2005 Hi Just got in this very minute from Aberdeen. I went up north yesterday afternoon to meet Marc (Boyakasha) and Russel (WUZ) in order to purchase and have all the s****y mods fitted to my car. The mods i got are pretty much open source, public knowledge by now- GT Spec Headers, Up pipe, 20G turbo,downpipe and full 3" Decat (H&S), APS CAI, regulator, loads of samcos, 4 defis (centre pod+ one sinlge) and some other bits and roberts. As i sloped off to watch the old firm game in the local bare knuckle boxing boozer (which my team won) Russell and Marc continued to work away on the car. On my return with the new copy of Banzai to see what i could buy next i noticed that the lights........................................had been de-tangoed!!!!!!!! result. I had also popped off to B&Q to get some crazy stuff for my own intuative mod. i actually managed to complete this myself and will keep the merchandise i used quiet until they spill the beans looks the kiddy and will work well. a bit of random drilling through bodywork later, hey presto its complete. I handed over my wonga to the boys for the parts and labour, which was completed with real professionalism!!! and headed back to glasgow off boost which took me 3hrs. After being smoked by chavs all the way down the road, including 3 hot chinas in a BMW which were encouraging me to play AND I COULDNT i sat in my crazy new car and considered taking it into the house for some jacuzzi fun for about 30 minutes. Looking at all the gauges and gadgets. awesome. The second phase of the project will be complete a week on Monday by Andy F. Fingers crossed dastek will be "OFF THE HOOK". AGAIN THANKS TO RUSSELL @ BHP DEVELOPMENTS AND MARC I LOVE SCOOBIES
fai17 Posted August 21, 2005 Posted August 21, 2005 Result then Gumball. Maybe you'll roast me on Crail now. I have a wee cunning plan too. Watch this space.
Gumball Posted August 21, 2005 Author Posted August 21, 2005 nae crail runs for me im afraid. well maybe one or two.........
WUZ Posted August 21, 2005 Posted August 21, 2005 Are you going to reveal the contents of your cold feed mod or are we going to have to "feed" you with praise until you release the "seed" of your knowledge. Sorry, couldn't resist Russell YO!YO!YO! - that mod is OFF THE HOOK, BOOOOOOOOOOOOOOOOOOOOOOOOY!
Gumball Posted August 21, 2005 Author Posted August 21, 2005 westwood, i dont know whether your trying to be funny by "feeding" the forum info on my Cold air "feed"mod? i think with the mods i will get a few "birds" with any luck. i reckon by the time its mapped it may well be "trilling". the defis are "the bomb". damn this rides hot, its off the hook fo shizzel
dipsy Posted August 21, 2005 Posted August 21, 2005 Will that lot make it slitly over the 400bhp mark chris after Andy remaped it
Gumball Posted August 21, 2005 Author Posted August 21, 2005 << Will that lot make it slitly over the 400bhp mark >> good guess mate!! i would say somewhere between 370-400 clearly 400 would be the horses hot one. heres hoping
Boyakasha Posted August 22, 2005 Posted August 22, 2005 Yo Yo Yo, that car is off the hook!!!! Good to meet you Chris, enjoyed all the banter over the weekend and can't wait till next Monday A little 'birdie' told me that you had done some 'nuts' mod to your car so I can't wait to see the car 'hanging' out with the rest of the homies. Marc
Gumball Posted August 22, 2005 Author Posted August 22, 2005 right !! I think i will now have to end the cloak and dagger stuff surrounding my cold air "feed" mod. Whilst in aberdeen, i went to B&Q to get myself some tumble drier pipe and some mesh to sit behind my fog lamp cover to reduce rain, water etc getting into my induction kit. having asked the moron at the shop what mesh he had he directed me towards the chicken wire section. (no good) that wouldnt have stopped rabbits getting into my induction. I found the pipework and carried on looking for mesh. suddenly........i saw a "bird feeder", about 5 inches high and 5 inches in diameter. i realised that when this was dismantled and flattened out it would provide me with a 5"x5" square and flat bit of mesh. in hindsight what i should have done was take it apart before i got back to Marcs house, but i didnt. They thought this was highly amusing !!!!! i think thinking outside the box and now have the perfect cold air "FEED" towards my APS CAI. just thought i would clear this matter up and explain what all the posts with "feed", "feeder", "nuts" was for. i wonder how amusing it will be when the feeder kits helping me get 380+bhp??
Gumball Posted August 22, 2005 Author Posted August 22, 2005 had to let loose with the word on the street holmes. its off the hook bro
jcscoob Posted August 22, 2005 Posted August 22, 2005 "off the hook" have you turned in to that pap from big brother!! lol ps, good mods m8
Gumball Posted August 22, 2005 Author Posted August 22, 2005 aye, we were listening to timothy westwood the realist gangsta fae radio one on friday as WE worked on the car. his patters totally howling and its turned into more than an annoying habit to copy him. cos hes a clowns pocket
Gumball Posted August 23, 2005 Author Posted August 23, 2005 and i phoned marc today to ask why my gauge alarm was going off constantly. he told me that i had set my oil pressure alarm at max instead of low !!!!!! i thought the higher the pressure the worse it would get other way round chris, other way round
gordyN01 Posted August 23, 2005 Posted August 23, 2005 sounding good chris am looking forward to see what u get did u get uprated intercooler?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now