SEEVERS Posted February 13, 2005 Share Posted February 13, 2005 got the new zorst fitted at C+C this morning,looks and sounds tremendous.......from peashooter to rocket launcher in 2.5 hrs what do you's think? see pics attached! These go on once the prodrive springs are fitted and my geometry is done!! Link to comment
fraser_drinkwater Posted February 13, 2005 Share Posted February 13, 2005 It works well done get the pea shooters to =3*k. Now the fun begins. lol Link to comment
SEEVERS Posted February 13, 2005 Author Share Posted February 13, 2005 Jamie, took the lights to a guy Swiggi put me in touch with,if i dismantle them myself he says he'll paint them and my wing vents for £40,i knew that other guy was trying to rip me off. Link to comment
jamie_wood Posted February 13, 2005 Share Posted February 13, 2005 Good stuff Car will be lookin the bollox next time I see it then Link to comment
~ ~ Cal ~~ Posted February 13, 2005 Share Posted February 13, 2005 Souncs nice .......I need details asap - how much ( if ya dont mind) and is it cat-back, de-cat, sports cat, Swiggi - is it the same as yours i.e Blitz-a-like ? Any chance of a video clip ? I can host Cal Link to comment
fraser_drinkwater Posted February 13, 2005 Share Posted February 13, 2005 Cal i heard it today and its the dogs m8. Link to comment
WRC No 1 Posted February 13, 2005 Share Posted February 13, 2005 it's looking good m8 wullie Link to comment
SEEVERS Posted February 13, 2005 Author Share Posted February 13, 2005 Cal,i had one cat removed 2.5" stainless straight through with angled 5" backbox exit so that i didn't have to get 2 right angle bends put in................the cost a mere £379.....not much to pay for that beautiful noise... Link to comment
SEEVERS Posted February 13, 2005 Author Share Posted February 13, 2005 Wullie,did you go in today to get a price for your downpipe...? Link to comment
WRC No 1 Posted February 13, 2005 Share Posted February 13, 2005 no did not to busy fiting my afr meter Link to comment
~ ~ Cal ~~ Posted February 13, 2005 Share Posted February 13, 2005 Excuse my ignorance Del but i assume it doesn't need a CEL fix for that ? I.e only the upper cats would require CEL fixes if removed ? Looks very nice indeed ! Link to comment
SEEVERS Posted February 13, 2005 Author Share Posted February 13, 2005 Thats correct mate Link to comment
~ ~ Cal ~~ Posted February 13, 2005 Share Posted February 13, 2005 << currently nursing a flat four induced nudger >> I wish you hadn't told me that ! These forums have a rather peculiar effect of lowering the digits in my bank account. I cannot understand the correlation Enjoy it Link to comment
wrxmania Posted February 13, 2005 Share Posted February 13, 2005 Need I say anymore!!!! C&C Custom Rumbles in Hillington I'll give Cameron a phone and find out when he expects it to fall off!! Just kidding Superb quality I am sure you will agree. Glad you like it - it looks good too. Brian Link to comment
Pooly Posted February 13, 2005 Share Posted February 13, 2005 Looks like an impressive piece of kit that! Cal, thought you said I was going to be worse than you, your well out in front at the mo! Link to comment
peter_macgowan Posted February 13, 2005 Share Posted February 13, 2005 Nice exhaust Seevers looks great. Got a pic of my Ninja I was £440 for Hayward & Scott Decat back, Centre section and the Ninja. And a small vid of it ticking over. Ninja ticking over Link to comment
~ ~ Cal ~~ Posted February 13, 2005 Share Posted February 13, 2005 Thats just pushed me over the edge .....Nudger material or what Link to comment
spooks Posted February 14, 2005 Share Posted February 14, 2005 If it sounds anything like Brian's then bub bub bub bub indeed Edited to ask, are those rims from Rare rims? Would love to see the quality of em if they are, will you be at the next Glasgow meet? Spooks Link to comment
SEEVERS Posted February 14, 2005 Author Share Posted February 14, 2005 Spooks ma man,the rims are from midland wheels in leamington spa,my missus says by the time i type this message we'll have a new set(ask Swiggi he knows).They are really lightweight,they got delivered to my work wrapped up well and the lads thought it was just tyres.I will be at the Glasgow meet,hoping to speak to yourself about the most reasonably priced place to get my geometry done after the PRODRIVE springs get fitted . seeyou ALL there. Link to comment
ozzy Posted February 14, 2005 Share Posted February 14, 2005 LOL @ the video clip; is that fuel it's spitting out the back of it sounds nice. you'll need to post a fly-by clip and giving it some revs Link to comment
peter_macgowan Posted February 16, 2005 Share Posted February 16, 2005 Just washed it, It was soap bubbles I hope . Will get a drive-by giving it some revs in the next few days. Link to comment
~ ~ Cal ~~ Posted February 16, 2005 Share Posted February 16, 2005 HOLY SH1T !!!!!!! Just watched that vid. clip ----> now that is loud even @ idle ! We need some clips with some revs too Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now