Jump to content

Help Please!


Recommended Posts

Posted

i have just fitted coilovers to my bugeye,and have lowered it to the point of not being able to get my trolley jack under the car. I have a loud knocking noise coming from the osr but i cant find anything loose or damaged. Could it be that with the car being this low, its putting to much strain on the diff as the driveshafts are at quite a large angle to the hubs? is there anything i can do to sort this out?

Posted
i have just fitted coilovers to my bugeye,and have lowered it to the point of not being able to get my trolley jack under the car. I have a loud knocking noise coming from the osr but i cant find anything loose or damaged. Could it be that with the car being this low, its putting to much strain on the diff as the driveshafts are at quite a large angle to the hubs? is there anything i can do to sort this out?

Have you tried getting the standard jack under it? If it fits, you can then lift it to accommodate the trolley jack :D

Posted
i just drive it onto a couple of bricks to give me enough room. its the knocking im worried about

i had the same problem on my old scoobie with coil overs, i used to get a loud knocking

sound from osr, the spring some how wasnt sitting in the right place, i used to put it back

& check nut on lower arm then it was fine, if there secondhand check to make sure the

threads are fine where you have the nut & lock nut, ive heard that some people grease

coil overs up which helps, goodluck hope you get it sorted :D

Posted (edited)

i will check that lower arm nut, they were bought brand new. its whenever i accelerate or turning left makes it worse. now its worse and it feels like its holding back on power. its really sluggish and grinds when i pull away. they have been fitted for over a week now. think the diff is b******sed

Edited by bugeyewrx
Posted
i will check that lower arm nut, they were bought brand new. its whenever i accelerate or turning left makes it worse. now its worse and it feels like its holding back on power. its really sluggish and grinds when i pull away. they have been fitted for over a week now. think the diff is b******sed

I would say that is probably more than coil over fitment issues. The only issues we have seen is knackered top mounts, or the washers missing on the top mounts too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...