kinghorn Posted May 16, 2009 Posted May 16, 2009 (edited) hey everyone had a search and cant see anything of any running, anyone interested, if so il get intouch with andy for prices Ok got a reply back from andy and basicaly we need 10 to make this work, he will do the maps in july or august prices are To custom map a customers Apexi Power FC is normally £280+v (GB > £250+v) Ecutek custom remap including licence for MY99- MY08 is £500+v (GB > £470+v) A remap of one of my previous Apexi/Ecutek/Autronic/Simtek maps is £195+v (GB > £175+v) To supply, fit and map a new Apexi PFC and Commander is £795+v (GB > £765+v) To supply, fit and map a 92-99 Simtek is £895+v (GB > £865+v) To supply, fit and map 01-05 Simtek is £1095+v (GB > £1065+v) hope thats ok for everyone Update 21/05 Andy says we can leave this running till end of the month (maybe if we get 20 we can get more discount) then book or just go ahead and end GB now and get it booked up let me know what you think Darren Edited June 14, 2009 by KINGHORN
Rice Rocket Posted May 16, 2009 Posted May 16, 2009 I'd be up for that, just a tweak on his existing map. New mods to be fitted 1st. Ricey
kinghorn Posted May 16, 2009 Author Posted May 16, 2009 well im gonna need a big tweek once everything arrives
StrikE Posted May 16, 2009 Posted May 16, 2009 Tweek me down too, just means i will need to get that new shiney exhaust a little quicker...... and the other little bits
kinghorn Posted May 16, 2009 Author Posted May 16, 2009 cool, il drop andy an email telling him this post is here and see what he can do il base it on 5-10 at the moment
soundie Posted May 16, 2009 Posted May 16, 2009 hm.. possibly! I haven't actually done a halluva lot that would affect the map since it was done in may 07, but if the dates are right, I might fit a couple of things and come along. Cheers, Chris.
cullenmin Posted May 16, 2009 Posted May 16, 2009 I'd be interested depending on date/price ect The dates are usually just whenever you organise it so thats flexible. Rich
cullenmin Posted May 16, 2009 Posted May 16, 2009 what u fitted rich ?? I lost all the settings on my AVCR controller so need it set up properly again. No idea how it lost all settings, the A and B channels were set up for 1 bar and 1.5 bar (or thereabouts) so its very strange how I lost settings on both channels. I did have stuff in the glove box (where the AVCR lives) and it was on a settings page when I realised I had actuator boost pressure. Its setup for a safe 1.3 bar just now but I think its overfueling. Oh the joys
jonboywrx Posted May 16, 2009 Posted May 16, 2009 yeh ill be up for this... need some 550's first.. then can fit new turbo so yeh count me in!
jasonb Posted May 16, 2009 Posted May 16, 2009 I will have to wait until i get my new engine and get it run in first!!! so im out until July!!
jcscoob Posted May 16, 2009 Posted May 16, 2009 I will have to wait until i get my new engine and get it run in first!!! so im out until July!! Jase you dont need to get yourself involved in this caper mate, your ECU is already licensed !!
cullenmin Posted May 16, 2009 Posted May 16, 2009 I will have to wait until i get my new engine and get it run in first!!! so im out until July!! These group buys usually take a bit of time to prepare and then the booking will end up having a cut off date most likely. July isnt too far away tbh and i think it would be within a cut off date. All depends on Andy though Rich
notsosmall Posted May 16, 2009 Posted May 16, 2009 I wouldn't mind more power so count me in as a possible (Date and price dependant)
~ ~ Cal ~~ Posted May 16, 2009 Posted May 16, 2009 I shal revert in due course but may aloso need a tweak ( UEL Headers & 3" exhaust system)
x444wrx Posted May 17, 2009 Posted May 17, 2009 I'M ALWAYS UP FOR MODS TO MY PRIDE AND JOY...WAS GOING TO TACKLE THE SUSPENSION NEXT BUT IT CAN WAIT I'LL START TWEEKING THE ENGINE FIRST!!!! MY BLOBEYES RUNNING A PRODRIVE ECU FROM A PPP FITTED AT FACTORY,BUT IVE CHANGES THE EXHAUST FOR A FULL MAGNEX SYSTEM INCLUDING DECAT DOWNPIPES,GOT A TURBO SMART DUMPVALVE ON IT THE NOW SO IM NOT SURE IF I WOULD BENIFIT FROM MAPPING YET???? IVE GO A SET OF MAGNEX HEADERS AND UP-PIPE WAITING TO FIT AND AN UPRATED WALBRO FUEL PUMP.HAVE MY EYE ON A FMIC AND A BIGGER BOLT ON TURBO AND WANT SLIGHTLY BIGGER INJECTORS,THAT I WANTED TO GET FIRST BEFORE LOOKING INTO MAPPING. IS IT WORTH MY WHILE THE NOW DOING IT OR WILL I BE BETTER OFF SPENDING MY HARD EARNED CASH ON THE SUSPENSION BEFORE TOUCHING THE ENGINE ANY FURTHER????????? ANY ADVICE OR COMMENTS WELCOME!!! IM GETTING MARRIED IN SEPTEMBER SO TRYING TO SPEND WHAT LITTLE IVE GOT LEFT BEFORE EVERY PENNY BECOMES A PRISIONER!!!! LOL JUST KIDDING!!!!
jasonb Posted May 17, 2009 Posted May 17, 2009 Jase you dont need to get yourself involved in this caper mate, your ECU is already licensed !! LOL I think its going to need re-licensed
jasonb Posted May 17, 2009 Posted May 17, 2009 These group buys usually take a bit of time to prepare and then the booking will end up having a cut off date most likely. July isnt too far away tbh and i think it would be within a cut off date. All depends on Andy though Rich Might be in depending on date then!!!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now