Looking For Parts

[seano]

Wheres the best and cheapest place to get a APS wing induction kit,A black Avcr,and 3port boost switch thingy,I was also going to get my standerd wheels painted dark grey or a dark bronze colour has any one got any pictures of standerd wheels painted.Thanks Sean

[dipsy]

The Avcr has boost solenoid valve.Ask Andy f if you need to run a 3 port boost solenoid valve with Avcr

Edited January 7, 2008 by Dipsy

[fai17]

The Avcr has boost solenoid valve.Ask Andy f if you need to run a 3 port boost solenoid valve with Avcr

Nope..you either an AVCR or a 3 port boost solenoid

[craig mac]

Wheres the best and cheapest place to get a APS wing induction kit

wrxmania in florida, if you can not source one here.

Speak to Bill he will ship as gift etc for minimum value so no import duty and vat

Edited January 8, 2008 by Craig Mac

[seano]

Whos Bill?? Is there no one local that does APS stuff,and what sort of money do they cost.I know i only need one or the other for the avcr or boost valve,wheres the best place to get them?

[ali37]

Whos Bill?? Is there no one local that does APS stuff,and what sort of money do they cost.I know i only need one or the other for the avcr or boost valve,wheres the best place to get them?

Dont know about the AVCR but for the boost solenoid and APS kit get them frm the US - cheaper than here with the exchange rate the way it is at the moment.

http://www.grdstore.com/prodrive-3port-boo...1bf13a24b9172d3

http://www.grdstore.com/sti-intake-c-146_2...1bf13a24b9172d3

Thats where i got my stuff.

Have never tried wrxmania but Craig got good results from there.

Ali

[seano]

Thanks, will STI stuff fit on a spec C? i take it it will,just checking.The prices seam good but id rather get it from here(uk) even if i have to pay a bit more .Knowing my luck the bits would get damaged lost etc if its from afar.

[ali37]

Try giving these guys a phone.

Don't know of anyone who has used them though.

http://www.airpowersystems.com/wrx/aps-uk/...istributors.htm

[P1_Paul]

If you're only needing the Spec C to run 360bhp, you won't need the 3-port boost solenoid, save your cash!

[seano]

If you're only needing the Spec C to run 360bhp, you won't need the 3-port boost solenoid, save your cash!

Andy Forrest has adv i change it.Do you still run the standerd one?

[P1_Paul]

Andy told me that it wasn't neded for my car, he said it's only really needed if the car struggles to hold boost up the rev range. Mine was ok, so didn't bother changing that or the actuator.

Edited January 9, 2008 by P1_Paul

[craig mac]

http://mastrowrx.com/

Ask for Bill in stores he will do as previously noted

[WUZ]

www.dsautomotives.co.uk

Russell

Edited January 10, 2008 by WUZ

[seano]

P1 Paul can i ask what you have done to your car just out of intrest,do you know what power it has with the mods you have done .I dont no what to do about the APS,Andy is saying there is a bit extra bhp to gain but are noisey which id like but im planing on a loud exhaust so i wonder if you would even here the induction noise over the exhaust

[P1_Paul]

Hi Sean,

I've added the following performance bits to the car -

255 lhr Walbro Fuel Pump

Miltek Turbo back de-cat exhaust system

Simota panel filter

EcuTek Remap

Going by other cars with similar mods on SN, it should be near 360/360 on the RR. It's not headline figures that tell the true story with the Spec C, it's the spool up and sustained power to the red line that's most impressive!

Spec C

[seano]

That sounds like some good power.I hope to be around that,i was only thinking 330-340bhp with these, m255 lhr Walbro Fuel Pump

Meercat 3inch Turbo back de-cat exhaust system

Green panel filter

EcuTek Remap by A/F 3pbs NGKgrade 7plugs Poss aps induction kit