seano

Just checked i have only got two pipes on mine so it must be a 2 port one ..What do you need to remove if you are fitting a 3 port one when the old on only had 2 pipes .I can see on mine one goes in to the wastgate actuator and the other on goes in to the air inlet but do i need to remove a hose or somthing for the compressor outlet for the thrid hose??? Paul does yours come withe pipes etc and if you could find out about the wiring etc i will take it

I have just checked the part no on mine its,16102AA360. 136200/2690. Denso 269.It has 2 wires coming out the multi plug on the top.I never checkd how many hoses come of it but i take it 2 and 3 ports will have the same 3 hoses coming of it.Sorry for being a total pain.

How can you tell if you have one fitted.My car came from Litchfeileds and was maped at Powerstation

If you could find that out mate i would be intrested in it.But i have seen one on ebay from prodrive and that has a wiring harness with it?.

Hi mate will it fit with out having to cut any wiring?

Hi Paul im intrested in 3pbs does it come with the wiring harnes or do i need to cut my own wiring and join it.Is there instructions on how to fit it as well.Is it a prodrive part? ta

Hi where the best place to get a 3port boost solinoid and a uprated fuel pump for a 2003/4 sti spec C.Thanks Sean

Wheres the best place to get a set of brembo stickers for my 2003 spec C,Im getting the callipers painted and want to replace the stickers to look like a factory finish.I need them ASAP,does anyone know the cost of them from the dealers.Ta

That sounds like some good power.I hope to be around that,i was only thinking 330-340bhp with these, m255 lhr Walbro Fuel Pump Meercat 3inch Turbo back de-cat exhaust system Green panel filter EcuTek Remap by A/F 3pbs NGKgrade 7plugs Poss aps induction kit

Speedlines are stunning mate

P1 Paul can i ask what you have done to your car just out of intrest,do you know what power it has with the mods you have done .I dont no what to do about the APS,Andy is saying there is a bit extra bhp to gain but are noisey which id like but im planing on a loud exhaust so i wonder if you would even here the induction noise over the exhaust

Andy Forrest has adv i change it.Do you still run the standerd one?

Thanks, will STI stuff fit on a spec C? i take it it will,just checking.The prices seam good but id rather get it from here(uk) even if i have to pay a bit more .Knowing my luck the bits would get damaged lost etc if its from afar.

Whos Bill?? Is there no one local that does APS stuff,and what sort of money do they cost.I know i only need one or the other for the avcr or boost valve,wheres the best place to get them?

Wheres the best and cheapest place to get a APS wing induction kit,A black Avcr,and 3port boost switch thingy,I was also going to get my standerd wheels painted dark grey or a dark bronze colour has any one got any pictures of standerd wheels painted.Thanks Sean

Hopfully wont be like a quite for long once i get to Meercat!!!

Got my self a nice red spec C tonight.

The guy has still to get back to me Jimser.Just incase you think iv forgoten about the bumper trims.

Ok mate i will let you know how i get on

Ok mate,i hopfully find out on Sat if the deals on and if so i will take them .Im in Paisley anyway so not to far.Do you Know if thats all i need to make the front bumper look like a STI one??.Do you have anything else i might be looking for a rear bumper also to get rid of that fog light.Ta

Have you got a price for the bumper trims.And where abouts are you from?? ta

Im going to go for the less is better aproach,so im thinking of removing the rear spoiler all together so the boot will be getting painted anyway,how much are you wanting for the bumper trims and is that all it needs to look like a sti front end??

I will give Andy a call and see what he says.Does any one know if you can buy the sti front bumper corner bits seperate and do they fit on with out much hassel,wheres the best place to get them from.

Not gettin as much money as i want,but i wish my own car was a diffrent colour or id be happy,but if the sale doesnt go through im still happy with what iv got.Can you have the poping and banging on a switch on the spec c,and i also want to get a LOUD exhaust so hopfully Meercat will sort me out.Even though i know loud exhaust are not everyones taste .Will my dumpvalve from my Hawkeye fit the spec c?