Scoobytoo its for you

[daniel]

Hi mate is there any chance you could dig up them part numbers for the adaptors for my sender units please. Thanks mate[Y]

[Dalthegooner]

I'm gonna assume that the adaptors you want are for oil temperature and oil pressure Dan.

You get them from LMA

The oil temperature adaptor is an LMA067

The oil pressure adaptor so that you can keep the original unit as well as the one for the gauge is LMA095/1

 

[SCOOBYTOO]

Dan[Y]

As above m8.

Cheers Dal. 

[daniel]

Thats cool guy's i will get on with it [Y]

[prodrive tony]

Ive got to do the same. I have oil pressure and temp senders and loads of adapters etc. Can any one explain the best place to mount the senders ie block, sandwich plate??

Thanks. 

[daniel]

I'm in this position because the sandwich plate turned out to be crap, so I'm mounting on the block hence the reason to find these adaptors

[prodrive tony]

Ill post a pic of my numerous adapters see what u think.

[daniel]

Have you tried to fit any of them yet? I think the pressure sender adaptor may have an extension pipe on it [*-)]

[prodrive tony]

Here you go

[daniel]

I will ring LMA tomorow and order the parts that dal has posted. Is that square fitting a tee piece ? (poss for oil pressure sender) if it is then you might only need an extension pipe.

[Dalthegooner]

The pressure sender adaptor does come with an extension pipe to move the oil pressure sender away from the alternator so you have room to fit the two. You can just take out the original adaptor and install gauge one in the hole. You don't need any adaptor for this but the oil light on the dash stops working, but you have the gauge insterad to monitor the pressure.

Tony, it looks like you will have the right adaptor for the temperature sender but the only way to be sure is to take the bung out and try. You can always refit the bung if you don't and order one from LMA

[daniel]

well I have bought the two adaptors and they should be in the post by the end of the day, if they fit ok then the part numbers are good. Thanks dal [Y]

[daniel]

I have had these delivered over the weekend and I will try to get them on in the week. Do they look like the right bits?

[dazzlers82]

they look right dan i have these on mine i fitted a month or so ago

[Dalthegooner]

Look good to me too [Y]

[daniel]

Great, I should be able to get my gauges working again []

[Dalthegooner]

Don't forget PTFE tape on all of the threads Dan.

[daniel]

Thanks for reminding me I will get some tomorrow, would have been just my luck putting it together and finding a leak