Strut Brace

[diablo]

anyone got any pointer in fiting these am a little unsure the front looks straight forward but the rear looks hard they are for my classic any guide or help would be greatly appreciated

[ryan_gwa]

Not difficult at all if its the one bracing the top mounts? Jacking the front wheels up always helps me align the holes as it allows the car to flex slightly.

[cullenmin]

The rears arent bad to fit.

Remove rear seats

Undo the bolt holding the seal belt reel and this gives you the access to the rear strut tops

Remove nuts on strut tops

wangle the top of the strut brace ends in, then tighten them up with the nuts

bolt in the seat belt reel again

attach the centre part of the strut brace and tighten it up

replace the rear seats

Jobs a good un

Rich

[Maxxed_Ross]

  ryan_gwa said:

Not difficult at all if its the one bracing the top mounts? Jacking the front wheels up always helps me align the holes as it allows the car to flex slightly.

oooo I wouldn't do that, as it might knock the wheel alignment off. It's better to adjust the strut brake to suit the shock bolts

It'll be a tight fit... but it's supposed to be. Also make sure when you take the bolts off the car is on as flat a ground as you can get it