Guest CRAIG D Posted January 29, 2009 Posted January 29, 2009 (edited) Hi Guys, i had a thought and desided that am going to fit me EXE-TC suspension Today but i just want to make sure that these top mounts are sitting the correct way. Here is a pic of the top mount can i assume that where is says out that should go to the left hand side of he wing as you look at it?? or does it go to the right ?? and should the small arrow what sitting about 11 o'clock face the bulk head?? No i havent been drinking again before sum1 slides that in Or sum1 can give me a bell 07955142984 Edited January 29, 2009 by CRAIG D
RA Dunk Posted January 29, 2009 Posted January 29, 2009 hmm cant help you with this as i havent got the top mounts yet
arch Posted January 29, 2009 Posted January 29, 2009 Craig I have never fitted the exec but I would imagine that the LH one is for the LH side of the car with the out sticker facing outboard toward the wing if John is prowling around he may be able to help
Guest CRAIG D Posted January 29, 2009 Posted January 29, 2009 Thanks for the reply guys i managed to get it sorted out and go all the suspension all fitted. First impressions are good, i did have a moment tho just off the newbridge around about did abit if fishing (fish tailing about the road for about 20meters or soo i thought id seen my scooby days over again. Unsure what caused it tho may have been some grease or i had the damping to hard???? I have them all at 20 clicks. Must say that the road noise have increased but am not fussed about that. Need to get my front and rear ARB,Drop links,un lift kit fitted then get some1 to set it up has anyone got any suggestion on which company to use for this??
RA Dunk Posted January 29, 2009 Posted January 29, 2009 Progrip are down your neck of the woods, they seem to be highly recommended
Guest CRAIG D Posted January 29, 2009 Posted January 29, 2009 Progrip are down your neck of the woods, they seem to be highly recommended Ah progrip thats the one. Thanks Something aint right with the suspension tho its very very twitchy, il need to get it sorted a nice trip to progrip mine just do it HOPFULLY. Has anyone with EXE-TC have the information regarding setting to use??????
RATechnology Posted January 29, 2009 Posted January 29, 2009 Craig, ring Graham Gleeson at Exe-tc direct... He's usually very helpful and can probably point you in the right direction for a base setup.. I haven't got his number anymore but have his email.. graham.gleeson@exe-tc.co.uk
arch Posted January 29, 2009 Posted January 29, 2009 remember you have just bolted on a set of coil overs with someone elses camber adjustments and your car has not been set up to suit them. Until you get the car aligned it will handle like ****. Progrip is the only place I would take my cars for an alignment
Spaceman Posted January 29, 2009 Posted January 29, 2009 Thanks for the reply guys i managed to get it sorted out and go all the suspension all fitted.First impressions are good, i did have a moment tho just off the newbridge around about did abit if fishing (fish tailing about the road for about 20meters or soo i thought id seen my scooby days over again. Unsure what caused it tho may have been some grease or i had the damping to hard???? I have them all at 20 clicks. Must say that the road noise have increased but am not fussed about that. Need to get my front and rear ARB,Drop links,un lift kit fitted then get some1 to set it up has anyone got any suggestion on which company to use for this?? Prob my dodgy welding on the rear end putting it out of align.
Guest CRAIG D Posted January 29, 2009 Posted January 29, 2009 (edited) Prob my dodgy welding on the rear end putting it out of align. Ah true enuff son, was a cracking joke and you fell for it too Edited January 29, 2009 by CRAIG D
Guest CRAIG D Posted January 29, 2009 Posted January 29, 2009 Craig, ring Graham Gleeson at Exe-tc direct... He's usually very helpful and can probably point you in the right direction for a base setup..I haven't got his number anymore but have his email.. graham.gleeson@exe-tc.co.uk Ah perfect il give him a bell in the morning thanks m8
Guest CRAIG D Posted January 29, 2009 Posted January 29, 2009 (edited) remember you have just bolted on a set of coil overs with someone elses camber adjustments and your car has not been set up to suit them. Until you get the car aligned it will handle like ****.Progrip is the only place I would take my cars for an alignment Yeah very true i must admit i didnt thing about that Am going to give progrip a bell tomorro as it very very twitchy and dont really fancey crash it Note to self MUST NOT CRASH Edited January 29, 2009 by CRAIG D
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now