Chris.Mcd Posted September 22, 2007 Posted September 22, 2007 (edited) Hey guys Having problems removing my injectors. Ones on passenger side does not look to bad but drivers side I cant even see them or know what to remove to get to them? Any advice would be great . Thanks Edited September 22, 2007 by Chris.Mcd
WUZ Posted September 22, 2007 Posted September 22, 2007 Classic or Newage? 15-20 minute job to remove them if its a Classic, a little longer for a Newage. Russell
Chris.Mcd Posted September 23, 2007 Author Posted September 23, 2007 Classic or Newage?15-20 minute job to remove them if its a Classic, a little longer for a Newage. Russell On a newage, sorry forgot to mention that. Its just getting to them on the newage. Alot of stuff in the way of them. Air box, water bottle, battery etc.
higgy Posted September 23, 2007 Posted September 23, 2007 Hi there The passanger side should take you around 45 min if your good with the tools but the drives side is i little more tricky. You will need to remore the resivoir bottle , airbox (to make it easyer) and the brackets below the res bottle. Once you have done this you should have clear accsess to the injectors( there will more than likely be a few wires in the way so take your time) When puting your new injectors in , watch the o-rings on the top as thef can be a little tricky(put some oil on them when installing) Hope this works out for you. Higgy give me a ring if you need any help 07740 724 185
fai17 Posted September 23, 2007 Posted September 23, 2007 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Well said Higgy
Chris.Mcd Posted September 23, 2007 Author Posted September 23, 2007 Hi there The passanger side should take you around 45 min if your good with the tools but the drives side is i little more tricky. You will need to remore the resivoir bottle , airbox (to make it easyer) and the brackets below the res bottle. Once you have done this you should have clear accsess to the injectors( there will more than likely be a few wires in the way so take your time) When puting your new injectors in , watch the o-rings on the top as thef can be a little tricky(put some oil on them when installing) Hope this works out for you. Higgy give me a ring if you need any help 07740 724 185 Thanks very much Higgy I have removed the Battery, water bottle and bracket from passenger side. Can see the injectors now Drivers side I have removed the airbox. Will go remove the reisvoir bottle, so I can get to remove the bracket. Thanks for the advice and number. Will give you a shout if I need any help
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now